Question about my tank’s water level

RoseQuatics

Community Member
View Badges
Joined
Jul 7, 2021
Messages
97
Reaction score
83
Location
Irvine, California
What state or country do you live in
California
Rating - 0%
0   0   0
Hello everyone,

I would greatly appreciate your opinion on my dilemma.

I filled my new 150g aquarium with water last night:; however the water level is uneven.

Front left: 2 1/2 inches from top
Back left: 2 1/4 inches from top
Front right: 2 1/2 inches from top
Back right: 2 3/8 inches from top

When I leveled the tank before filling it, it was even. As it filled with water the back side has compressed to where it is currently.

The tank is 5’x2’x2’. It is eurobraced/bottom braced 7/16” glass.

Should I solve the water level? Is it fine? Here are some pictures. Thank you.

Level from left side panel:

70646513000__825FE9EB-3E2F-4A59-AFEA-49C90256206F.jpeg

Front right:
IMG_0618.jpeg

Back left:
IMG_0619.jpeg

Front right:

IMG_0620.jpeg

Back right:
IMG_0621.jpeg
 
Do you have photos of your stand and floor.

Did you level the stand to the floor?

The question is what shifted under the weight... Did the floor bend or the stand bend.

If you look at the base of the tank does the tank sit perfectly flat or are their gaps under the tank?

Put the same level on the floor at the corners of the stand and see if the floor is level in that area.

What's the floor under the tank - slab, foundation, second story, etc

Dave B
 
Do you have photos of your stand and floor.

Did you level the stand to the floor?

The question is what shifted under the weight... Did the floor bend or the stand bend.

If you look at the base of the tank does the tank sit perfectly flat or are their gaps under the tank?

Put the same level on the floor at the corners of the stand and see if the floor is level in that area.

What's the floor under the tank - slab, foundation, second story, etc

Dave B

Hey Dave, thanks for your help. I checked the floor and it’s good. I 100% know it’s the mat underneath the tank. We used an industrial foam mat then cut to shape. We foolishly didn’t realize that one of the sides of the mat has a gradient at the edge ( it’s not perfectly square on one side) and when we did the cut we had used the side with the small gradient. The reason the back side of the tank is compressed more is because of that gradient.
 
That is too much sag for my liking. I would not feel comfortable with that even in the relatively short term. I have the same tank. I used a treadmill mat on mine. A little more dense than a yoga mat and about 1/16” thicker.
 
Hello everyone,

I would greatly appreciate your opinion on my dilemma.

I filled my new 150g aquarium with water last night:; however the water level is uneven.

Front left: 2 1/2 inches from top
Back left: 2 1/4 inches from top
Front right: 2 1/2 inches from top
Back right: 2 3/8 inches from top

When I leveled the tank before filling it, it was even. As it filled with water the back side has compressed to where it is currently.

The tank is 5’x2’x2’. It is eurobraced/bottom braced 7/16” glass.

Should I solve the water level? Is it fine? Here are some pictures. Thank you.

Level from left side panel:

70646513000__825FE9EB-3E2F-4A59-AFEA-49C90256206F.jpeg

Front right:
IMG_0618.jpeg

Back left:
IMG_0619.jpeg

Front right:

IMG_0620.jpeg

Back right:
IMG_0621.jpeg
2.5 on one side , 2.25 on the other .
and there is another measurement of 2.375
That’s 1/4” difference … depending on the size it might be ok but I personally wouldn’t leave it
 
How long has your tank been running? If you just filled it I would fix it.
 
2.5 on one side , 2.25 on the other .
and there is another measurement of 2.375
That’s 1/4” difference … depending on the size it might be ok but I personally wouldn’t leave it
The tank is 60”x24”x24”. The glass is 7/16” think. It is eurobraced and it has a bottom brace.
 
Probably fine until the weekend. I would drain it completely before trying to fix it. Just save the water if you have something to put it in.
 
Yeah this weekend should be fine. I would recheck level with it empty. Can we see a picture of the support foam you used? It sounds like a new foam leveling mat may be in order. I know that can be a real pain
 
Yeah this weekend should be fine. I would recheck level with it empty. Can we see a picture of the support foam you used? It sounds like a new foam leveling mat may be in order. I know that can be a real pain
https://www.homedepot.com/p/G-Floor-25-ft-Length-Slate-Grey-Mat-Edge-Trim-GFEDGE25SG/203451240
This is the mat I used. The problem is with the edge. It’s not square. Since one side is thinner than the other it’s compressed more on the thinner side. *facepalm*
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new