Question about Red Sea Pro Nitrate Kit

[WVReefJunkie]

I bought a Red Sea Nitrate Pro test kit to test my nitrates. I had a Salifert but wanted to test with another kit for a comparison. When I tested with the Red Sea Pro kit I am a darker color than the darkest color on their card. How can I figure out what ppm my nitrates are at? It is a dark redish/pinkish color. The card goes up to 4ppm.

 

[adam@army]

Doest really matter if its darker or lighter, for as long as it totally change color to redish pinkish the stayed that way for 10sec that's your reading. I got the same problem with this new kit. I had the old kit that has similar color as the card. I think they using new color but forgot to change the color in the card. Hope it helps.

 

[GoVols]

I bought a Red Sea Nitrate Pro test kit to test my nitrates. I had a Salifert but wanted to test with another kit for a comparison. When I tested with the Red Sea Pro kit I am a darker color than the darkest color on their card. How can I figure out what ppm my nitrates are at? It is a dark redish/pinkish color. The card goes up to 4ppm.

Do you still have the Salifert kit to crosscheck if shows over 4ppm to?

 

[Tyreef2016]

pretty sure its 15ml ro/di and 1ml tank water for the high range test.

 

[kazikage42]

To get a reading of higher than 4 ppm using red sea, you'll have to use 15 ml of rodi water and 1 ml tank water for the high range. Using 16 ml is usually only for low low range readings. Hope this helps

 

[reefluvrr]

 

[jsker]

As @reefluvrr posted with a picture, test using the high range test. 1 ml tank water and 15 RO/Di and run the test the same amounts of A, B, C and times and you will get the high side reading. Use the wheel to match the colors:)

 

[WVReefJunkie]

OK, what should my target nitrate be for a mixed reef?

 

[kazikage42]

OK, what should my target nitrate be for a mixed reef?

Though my tank is mainly sps and few LPS, they seem to do fine between 2-5 ppm

 

[WVReefJunkie]

Mine just tested over 4ppm low range, and between 32-64 ppm high range.

 

[kazikage42]

Mine just tested over 4ppm low range, and between 32-64 ppm high range.

Low range seems right, but the high range don't seem correct. It should be a lighter color on the high range if the low range is reading over 4 ppm. Unless your nitrates really are that high then i suggest doing a large water change or more frequent small ones to help lower it. BTW I would suggest getting a salifert kit instead bc it's alot easier to do and get faster readings.