I'm assembly mine and wondering about the third rubber piece that has a larger cut out? I'm assuming maybe for a specific brand of sump but inquiring minds like to know.
Question for those with an N clear M roller
- Thread starter exnisstech
- Start date
- Tagged users None
- Joined
- May 29, 2025
- Messages
- 170
- Reaction score
- 208
- Location
- SF Bay Area
- What state or country do you live in
- California
Good question! There are two taller water blockers and one shorter one in the kit.
- Use a taller blocker at the back, on the sensor side.
- At the front, choose either the taller or shorter blocker to suit your sump's filter-sock opening and water level.
You can try both front options and use the one that gives you the smoothest flow and least noise while keeping the sock opening properly sealed. The third piece is simply the alternative front blocker.
- Use a taller blocker at the back, on the sensor side.
- At the front, choose either the taller or shorter blocker to suit your sump's filter-sock opening and water level.
You can try both front options and use the one that gives you the smoothest flow and least noise while keeping the sock opening properly sealed. The third piece is simply the alternative front blocker.
OP
OP
Probably common sense but anyone running two with one as an extension using the blocker with the larger cut out on the unit without the sensor allows it to become clogged first so the fleece doesn't advance until the drive unit is clogged. This will help from wasting fleece.
Similar threads
