Red Dragon 3 Plumping Help

  • Thread starter Thread starter Lionsreef
  • Start date Start date
  • Tagged users Tagged users None

Lionsreef

Active Member
View Badges
Joined
Jun 26, 2017
Messages
154
Reaction score
139
Location
Massachusetts
What state or country do you live in
Massachusetts
Rating - 0%
0   0   0
I'm trying to connect the output of my Red Dragon 3 return pump to my ELOS flexible return line. I'm guessing i should use a 1 inch barbed fitting for the hose end but when I went to the hardware store I could not find the right combination of fittings to mate to the RD2 pump outlet?

Does anyone else know what fittings are required?
fittings.jpg
rd3 pump.jpg
pump.jpg
 
What model pump is it? Can you post a pic of the sticker on the pump?
 
And what side tubing on the tank?
 
I would glue a 3"-4" piece of pvc pipe in the collar on the pump.
Then glue a slip/thread coupling on the pvc pipe.
Then use the appropriate plastic female hose barb for the inside dia. hose you have.

Make sure the collar coming off the pump is in usa inches and not metric. Mine came with metric.
I would take the hose you have with you to make sure you get the correct hose barb.
 
Make sure the collar coming off the pump is in usa inches and not metric. Mine came with metric.
I would take the hose you have with you to make sure you get the correct hose barb.

The slip collar is 1.25 inch ID. I will take both with me to home depot tonight and see what i can come up with.
 
The website says it has a 3/4” outlet, so you can extend that with pvc pipe and attach a barb to that, or glue a barb straight into the coupler and use a plastic hose clamp to secure. Hopefully the Elos has 3/4” hose and it’ll be a direct fit.
 
The slip collar is 1.25 inch ID. I will take both with me to home depot tonight and see what i can come up with.

I also had better luck at ace hardware finding barb connections. Home Depot has a few, but they aren’t with the pvc stuff.
 
The website says it has a 3/4” outlet, so you can extend that with pvc pipe and attach a barb to that, or glue a barb straight into the coupler and use a plastic hose clamp to secure. Hopefully the Elos has 3/4” hose and it’ll be a direct fit.
Only hose barbs I've seen is either male or female threaded.
Have a link to these slip fit hose barbs?
 
I struck out. It seems based on the Royal Exclusive website the pump outlet is metric and is 25mm which is just shy of 1 inch. All local hardware stores do not carry metric pvc fittings.
 
I struck out. It seems based on the Royal Exclusive website the pump outlet is metric and is 25mm which is just shy of 1 inch. All local hardware stores do not carry metric pvc fittings.

It’s says it .75” or 25 mm. Did you take the collar with you to see what pipe will fit? The outside diameter of 3/4” pvc should fit into that collar, but it’s hard to say without having the parts.

http://royalexclusiv.com/Flow-Pumps...agon-3-Mini-Speedy-50-Watt-1-321-gph::56.html
 
I struck out. It seems based on the Royal Exclusive website the pump outlet is metric and is 25mm which is just shy of 1 inch. All local hardware stores do not carry metric pvc fittings.
Just like mine.
Maybe @slief can help
 
It’s says it .75” or 25 mm. Did you take the collar with you to see what pipe will fit? The outside diameter of 3/4” pvc should fit into that collar, but it’s hard to say without having the parts.

http://royalexclusiv.com/Flow-Pumps...agon-3-Mini-Speedy-50-Watt-1-321-gph::56.html

My RD3 80 watt pump came with only metric fittings.
When I got my RD3 150 watt pump, I think I contacted Premium Aquatics in advance and received the correct ones with the pump.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new