I am selling my Reefer 450 in anticipation of moving and being able to upsize my Reef.
This tank is actually only a little more than a year old although the sump and stand are + 2 years old. Tank was a new replacement from Red Sea after my original sprung a leak. Tank is pretty much scratch free as I was able to learn some valuable lessons on my original tank. I have the splitter on the inlet in the tank as seen in pics. I have cleaned the best I can and will probably be able to clean a bit more when i finish breaking it down.
Stand is black as you can see and has the Oled motion light inside to provide light when working in the sump area. Sump is the Red Sea that has white plastic lining the outside to help with optics. I have the stock ATO reservoir but it has been drilled to use as a fuge. Can still be used as ATO with a block plate. My float valve was set up to run 1/4 line from my RO/DI. Never had any problems running this way, but this also would be easily converted to take the stock rubber line from ATO res.
I am also including my Waveline 10,000 DC pump I had first used on tank. I upgraded this to a Varios8 because the Varios was a bit quieter.
Also will include my Red Sea C-skim 1800 skimmer. This skimmer might not be pretty but is a work horse at skimming. I had tried a Nyos 120 and it was to finicky for me. The Red Sea was very forgiving steadily pulling skimmate. This skimmer worked off of a line from my manifold which I can also include.
I am asking $1500 for Tank, stand, sump, pump and skimmer together. Prefer local p/u but I have a truck if some one needs help with delivering. I am in the Columbia SC area but don't mind traveling for extra consideration.
Thanks for looking and please PM me for any further questions or interest.
This tank is actually only a little more than a year old although the sump and stand are + 2 years old. Tank was a new replacement from Red Sea after my original sprung a leak. Tank is pretty much scratch free as I was able to learn some valuable lessons on my original tank. I have the splitter on the inlet in the tank as seen in pics. I have cleaned the best I can and will probably be able to clean a bit more when i finish breaking it down.
Stand is black as you can see and has the Oled motion light inside to provide light when working in the sump area. Sump is the Red Sea that has white plastic lining the outside to help with optics. I have the stock ATO reservoir but it has been drilled to use as a fuge. Can still be used as ATO with a block plate. My float valve was set up to run 1/4 line from my RO/DI. Never had any problems running this way, but this also would be easily converted to take the stock rubber line from ATO res.
I am also including my Waveline 10,000 DC pump I had first used on tank. I upgraded this to a Varios8 because the Varios was a bit quieter.
Also will include my Red Sea C-skim 1800 skimmer. This skimmer might not be pretty but is a work horse at skimming. I had tried a Nyos 120 and it was to finicky for me. The Red Sea was very forgiving steadily pulling skimmate. This skimmer worked off of a line from my manifold which I can also include.
I am asking $1500 for Tank, stand, sump, pump and skimmer together. Prefer local p/u but I have a truck if some one needs help with delivering. I am in the Columbia SC area but don't mind traveling for extra consideration.
Thanks for looking and please PM me for any further questions or interest.
Last edited:
