red sea reefer return pipe dimensions

[stevedola]

I am looking for the metric size for the Red sea reefer 250 return pipe. I want to create a manifold on my return but dont know which union metric size it is to convert to US. Any help would be appreciated.

Metric to Standard PVC Union - Slip X Slip

Adaptive Reef Metric to Standard PVC Adapter Unions make it incredibly simple and clean to plumb skimmers, pumps, reactors, and other equipment with European metric connections into your system. Each union has two female slip fitting connections, one with a metric side and one with a standard US...

www.bulkreefsupply.com

 

[blaxsun]

I am looking for the metric size for the Red sea reefer 250 return pipe. I want to create a manifold on my return but dont know which union metric size it is to convert to US. Any help would be appreciated.

Metric to Standard PVC Union - Slip X Slip

Adaptive Reef Metric to Standard PVC Adapter Unions make it incredibly simple and clean to plumb skimmers, pumps, reactors, and other equipment with European metric connections into your system. Each union has two female slip fitting connections, one with a metric side and one with a standard US...

www.bulkreefsupply.com

You could also contact Red Sea. They are providing adapters with their new G2 tanks.

 

[stevedola]

ok ill try to reach out but was wondering if anyone that had a reefer tank could help with information they may have already obtained. I googled but much of this sunk deep in a thread somewhere and its like searching for a needle in a haystack.

 

[stevedola]

Also i dont think that Red sea is providing union adapters for my application but i could be wrong.

 

[blaxsun]

Also i dont think that Red sea is providing union adapters for my application but i could be wrong.

Here's what they indicate:

All pipes are preformed with quick connectors at all joints (no gluing required). Bulkhead connectors suitable for both Metric and USA standard pipes can be purchased separately, allowing you to customize your sump piping.

 

[stevedola]

Here's what they indicate:

I understand. It would require complete replumbing of the return line in standard us...which is an option. Just wanted to utilize the pipe and fitting I have now with a retro fit manifold.

 

[stevedola]

so I called redsea and spoke with a salesman. explained it was 25mm pipe.