- Joined
- Dec 31, 2017
- Messages
- 112
- Reaction score
- 6
Hi
For sale
$50
AutoTop off W/
3 sensor switch Main controller
Introduction
The Marine Magic Auto-Top-Off system is specially designed for the use of marine tank. This is a low voltage device, safe and easy to use. It helps you to fill out the water automatically for the evaporation.
Features
Using Instruction
![ATO4.jpg ATO4.jpg](https://www.reef2reef.com/data/attachments/1094/1094750-9057cab0801e5e012a07e747a1308304.jpg)
For sale
$50
AutoTop off W/
3 sensor switch Main controller
Introduction
The Marine Magic Auto-Top-Off system is specially designed for the use of marine tank. This is a low voltage device, safe and easy to use. It helps you to fill out the water automatically for the evaporation.
Features
- Wall mounted and Table top design.
- 12V, 1A device, low voltage operation, high safety.
- 2 float switch control has 3 mode to operate.
- 1st mode 1 float switch simple operation. while water level drop under the float switch, water pump will be working for refilling.
- 2nd mode 2 float switch opeartion, 2nd one use as a second sensor while 1st sensor fail or block my snail.
- 3rd mode 2 float switch operation, 2nd one to detect the sump water is empty or not. While empty, the red LED will be on.
- Magnetic and transparent float switch design. Easy to adjust and visible to bracket inside.
- Brushless DC water pump. Lifting height is 2-3 meter
Using Instruction
- Put the float switch wire through the float switch bracket top opening.
- Connect the float switch to the bottom of the 2 plug. It has marking A and B on the back of housing.
- Connecting the water pump to the controller. The plug is on the left of the controller. There is a ?PUMP? marking on the back of housing. Connecting the silicon tube to the water pump outlet.
- Put the adaptor to the plug and connect to the unit. There is ?Power? marking on the back of housing.
- Press the ON/OFF button. The white LED will be on if power connected.
- Selecting your design mode, the blue LED indicate the mode you are using.
- In mode 3, if the water in the sump is empty, the red LED will be on to alert you.
![ATO1.jpg ATO1.jpg](https://www.reef2reef.com/data/attachments/1094/1094747-21f7e114b9cea83bfebb956514455383.jpg)
![ATO2.jpg ATO2.jpg](https://www.reef2reef.com/data/attachments/1094/1094748-236bbb31158ba3c01acef4de7012b72d.jpg)
![ATO3.jpg ATO3.jpg](https://www.reef2reef.com/data/attachments/1094/1094749-81cc4c278ff94c1c16722c5ecd713367.jpg)
![ATO4.jpg ATO4.jpg](https://www.reef2reef.com/data/attachments/1094/1094750-9057cab0801e5e012a07e747a1308304.jpg)