Reefbreeder 24" Photon V2 Pro over a 35" tank?

squarereefer

Active Member
View Badges
Joined
Sep 8, 2019
Messages
109
Reaction score
42
What state or country do you live in
South Carolina
Rating - 100%
1   0   0
I would like to upgrade my lighting and have a chance to purchase a NIB RB Photon 24" v2 pro at a fair price. I realize these are being phased out for the new Meridian, but my budget does not support the newest light.

My tank is an Innovative Marine IM75 with the internal overflow, 35x24x20". I'll use a rear tank mount, which allows a max height of 14". The tank today is mostly favia, acans, zoas, and a giant toadstool leather - aka, easy corals. I would like the ability to try out acropora or other branching sps in the middle of the tank in the future.

I know the 32" Photo would be even better, but is the 24" worth while on my setup? Am I significantly underpowering the tank for my goals?
 
that fixture, providing up to 140 watts of LED power, would be more intensity than you'd ever need on that tank in my opinion. good purchase, just tune down as needed to suit your goals.
 
that fixture, providing up to 140 watts of LED power, would be more intensity than you'd ever need on that tank in my opinion. good purchase, just tune down as needed to suit your goals.
Thanks! My only concern is spread on the sides, but I think it should reasonably spread over the full 35" width, even if a little less par on the edges. As long as the tank does not look uneven, I'd be happy.

I see you're a Kessil Fanboy - I'll have to admit I am also tempted by a used AP9x available nearby for only a few bucks more than the RB. I had a rough time with two used Kessil 360s Tuna Blues years ago, both had the white channels fail within a few months of warranty end. That left a bitter taste in my mouth, but I know they are awesome lights, and the AP9X is super interesting.
 
If you put acro in the right location I would expect that light to work. That said I have two photon 32 pros over my acro tank which is 36x22x22" I believe the lights are 11" above the water.
2? Geez, that sounds like a ton 😀 . If you had to guess, would the 24" light spread enough to the sides to make the 35" wide tank look evenly lit? I expect par to fall off at the edges.
 
2? Geez, that sounds like a ton 😀 . If you had to guess, would the 24" light spread enough to the sides to make the 35" wide tank look evenly lit? I expect par to fall off at the edges.

Tank is pretty full and when I started it keeping acros was my goal so I wanted to make sure and have plenty of light from the start. Do I need 2? Probably not and they do make keeping lower light coral a challenge because I'm getting 300 par on the bottom and 500+ at the top.
I also have a meridian 11 over an IM20 and am happy with it but TBO i would have no issues running a photon if I could have found a NIB unit.
The lights both have been great snd I love the panel vs puck design. I really like the new app too. Something to mention tho I read some people having issues migrating photons to the new app and had to replace a chip in the light to be able to migrate over. I think it was only lights that had already been connected to the old reef nexus app but it might be worth while to asked RB about it before you set it up if you get one. CS has been very good at responding the couple times if had questions.


PXL_20260216_162338557.MP~2.jpg


PS i have a single 24 over one end of my 330g and can get some par measurement off to the sides later this eve if you would like. I have an appogee 510 par meter here.
 
I run a 24 over my RS170 nem system. It will cover your int 75 tank easily and will grow anything you want on its own.
I run photon 50's, 48", over my ext170, 60×30×22 system. A little less par in the ends but not really an issue.
 
Tank is pretty full and when I started it keeping acros was my goal so I wanted to make sure and have plenty of light from the start. Do I need 2? Probably not and they do make keeping lower light coral a challenge because I'm getting 300 par on the bottom and 500+ at the top.
I also have a meridian 11 over an IM20 and am happy with it but TBO i would have no issues running a photon if I could have found a NIB unit.
The lights both have been great snd I love the panel vs puck design. I really like the new app too. Something to mention tho I read some people having issues migrating photons to the new app and had to replace a chip in the light to be able to migrate over. I think it was only lights that had already been connected to the old reef nexus app but it might be worth while to asked RB about it before you set it up if you get one. CS has been very good at responding the couple times if had questions.


PXL_20260216_162338557.MP~2.jpg


PS i have a single 24 over one end of my 330g and can get some par measurement off to the sides later this eve if you would like. I have an appogee 510 par meter here.
Super helpful, thank you!
 
I wasn't able to get off to the sides and see how much par fell off like I wanted because of the light placement and a large euro brace. I was able to get a measurement directly under the center and at each end so its something I suppose.
Untitled.jpeg



Why i couldn't measure further to the sides
PXL_20260225_221205288.MP.jpg
 
I wasn't able to get off to the sides and see how much par fell off like I wanted because of the light placement and a large euro brace. I was able to get a measurement directly under the center and at each end so its something I suppose.
Untitled.jpeg



Why i couldn't measure further to the sides
PXL_20260225_221205288.MP.jpg
Thank you!! Your tank is beautiful, and the light looks fantastic. How do you feel about app to control the lights? Is it easy to use and reliable?


I am trying hard to talk myself out of this upgrade. The biggest driver for me is to get rid of the clunky app of my NooPsyche K7's. The lights seem fine, but the app is frustrating.
 
I have 6 noopsyche k7and agree the app isn't the best. I don't even bother with Wi-Fi anymore and just connect via AP mode. I really like the reefbreeders app. The only gripe I have is there no acclimation mode but that's not a huge deal for me. I really like the ability to share schedules with the community so if you see someone's schedule that you like it can be downloaded and activated on your light very was easily.
That said the noopsyche are very capable lights. This tank ran under noops.

PXL_20240222_233233684~2.jpg



The tank I took the par readings from has the noops over it now. I'm just running the photon 24 temporarily trying something out. Not trying to talk you out of the photons lol. I don't change lights often once I have them set so I deal with the noopsyche app. I already had 6 so I just moved them to the new tank instead of buying new lights.

This is the tank under all noops.
PXL_20251108_012602277~2.jpg
 
Last edited:
You can always hang the lights higher fo better coverage. The light is already way too strong to fully max any channel. So just lift it higher and increase power.
 
I have 6 noopsyche k7and agree the app isn't the best. I don't even bother with Wi-Fi anymore and just connect via AP mode. I really like the reefbreeders app. The only gripe I have is there no acclimation mode but that's not a huge deal for me. I really like the ability to share schedules with the community so if you see someone's schedule that you like it can be downloaded and activated on your light very was easily.
That said the noopsyche are very capable lights. This tank ran under noops.

PXL_20240222_233233684~2.jpg



The tank I took the par readings from has the noops over it now. I'm just running the photon 24 temporarily trying something out. Not trying to talk you out of the photons lol. I don't change lights often once I have them set so I deal with the noopsyche app. I already had 6 so I just moved them to the new tank instead of buying new lights.

This is the tank under all noops.
PXL_20251108_012602277~2.jpg
Sorry for delayed response, but thank you for being so helpful! I may just stick with the Noops for now, but the RB is very very tempting. With the help of ChatGPT, I finally got the Noops tweaked yesterday to a spectrum that looks good to my eyes. Two years of ownership and this is the first time I've felt like the colors of my fish pop instead of being muted by heavy blues. I'd love to be able to the the light to look like your last picture in this post of the tank under all Noops. Here is what I settled into yesterday
 

Attachments

  • ideal settings reduced to 70 max.jpg
    ideal settings reduced to 70 max.jpg
    158.2 KB · Views: 65
I don't have a QR code or I'd share it. Some people target a specific Kelvin or spectrum. I like to get a look that's pleasing to me so I always set my light that way then tweak percentages to get the par levels needed.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new