- Joined
- Sep 28, 2011
- Messages
- 2,023
- Reaction score
- 2,216
- Location
- Arroyo Grande
- What state or country do you live in
- California
I bought 6 reefi 2.1 in early June 2024 so I have now had them for roughly 7 months. They replaced 8 hydra 32hds. Based on Daniel's (owner of Reefi) recommendation I went with 6 instead of 8. He absolutely could have sold me two more but chose to be an honest broker and suggested the six!
Tank is 68"x36"x30" and also runs 4 x 54watt t5 bulbs for supplementation.
My initial inspection of the units showed a very high quality built unit. Using metal and glass where others would use plastic. Each unit has a small led display board that can provide information as opposed to colored blinking lights on most other units. The lights come with two reflectors, a 90 and a 120. I believe. Believe. I went with the ones that were pre-installed as I am using t5 for supplemental linear light source.
The lights were easy to hang on 20/40 aluminum bars. Daniel sells a kit, but I 3d print so I made my own brackets. If I didn't have my own 3D printer I would have bought his.
Even though these lights have active cooling, they are significantly quieter than the Hydra 32 HDs. Even at my peak of 180 watts I can barely hear them. This was the main catalyst for replacing the other lights. At peak the Hydra 32 HDs sounded like a drone strike in my living room.
Setting them up was very easy. Though, I would recommend using a computer rather than an Android or iPhone. This leads me to other people's biggest complaint. Some say the operating system is a touch clunky compared to some of the refined ones from other high-end brands.
Personally, I find the operating system to be just fine. I didn't do much to change from Daniel's stock program for SPS. I did change a couple of the lighting blocks to less blue using instead the peak coloring at a slightly decreased power range. Since initial setup I have had zero desire to change. They look great.
At peak settings I am getting roughly 300 to 400 par at about 28 in deep. Compared to the Hydra 32 HDs at max power at that depth was about 120 par. And when the unit is at 300watts (peak) around 600 par at 28 inch depth. These units absolutely have the punch to get light deep.
About a month ago one of the lights stopped working. I contacted Daniel on the Facebook group and he got back to me in about 20 minutes. We trouble shoot for a few and he told me the PCB board was likely bad. He gave me the option to either send the light to him and he would fix it or send me a new PCB board which would be much faster. As I consider myself fairly handy, I opted to have him send me a new board. It arrived in a couple of days and the swap took about 15 minutes. These lights have a 3-year warranty as opposed to a one-year by most. And Daniel is very quick to respond to any issues.
If you are looking for a new lighting system especially for an SPs tank that really needs that extra punch. I would absolutely recommend these lights. As I am considering changing to a larger tank, I will be absolutely adding more of these.
Give Daniel a chance, if you have questions. I'm sure he would be happy to answer.
Pre reefi
Post reefi
Tank is 68"x36"x30" and also runs 4 x 54watt t5 bulbs for supplementation.
My initial inspection of the units showed a very high quality built unit. Using metal and glass where others would use plastic. Each unit has a small led display board that can provide information as opposed to colored blinking lights on most other units. The lights come with two reflectors, a 90 and a 120. I believe. Believe. I went with the ones that were pre-installed as I am using t5 for supplemental linear light source.
The lights were easy to hang on 20/40 aluminum bars. Daniel sells a kit, but I 3d print so I made my own brackets. If I didn't have my own 3D printer I would have bought his.
Even though these lights have active cooling, they are significantly quieter than the Hydra 32 HDs. Even at my peak of 180 watts I can barely hear them. This was the main catalyst for replacing the other lights. At peak the Hydra 32 HDs sounded like a drone strike in my living room.
Setting them up was very easy. Though, I would recommend using a computer rather than an Android or iPhone. This leads me to other people's biggest complaint. Some say the operating system is a touch clunky compared to some of the refined ones from other high-end brands.
Personally, I find the operating system to be just fine. I didn't do much to change from Daniel's stock program for SPS. I did change a couple of the lighting blocks to less blue using instead the peak coloring at a slightly decreased power range. Since initial setup I have had zero desire to change. They look great.
At peak settings I am getting roughly 300 to 400 par at about 28 in deep. Compared to the Hydra 32 HDs at max power at that depth was about 120 par. And when the unit is at 300watts (peak) around 600 par at 28 inch depth. These units absolutely have the punch to get light deep.
About a month ago one of the lights stopped working. I contacted Daniel on the Facebook group and he got back to me in about 20 minutes. We trouble shoot for a few and he told me the PCB board was likely bad. He gave me the option to either send the light to him and he would fix it or send me a new PCB board which would be much faster. As I consider myself fairly handy, I opted to have him send me a new board. It arrived in a couple of days and the swap took about 15 minutes. These lights have a 3-year warranty as opposed to a one-year by most. And Daniel is very quick to respond to any issues.
If you are looking for a new lighting system especially for an SPs tank that really needs that extra punch. I would absolutely recommend these lights. As I am considering changing to a larger tank, I will be absolutely adding more of these.
Give Daniel a chance, if you have questions. I'm sure he would be happy to answer.
Pre reefi
Post reefi

