Return pumps

I bought a pair of Red Dragon 5 ECO 25W DC pumps for my 110. Yes they are expensive but I wanted German made pumps. I wanted DC for quietness, reduced heat, speed control, and to reduce the possibility of getting electrocuted by my aquarium. I love the pumps, they are dead silent, but I'm not crazy about the controllers. What I do like is having two return pumps for redundancy instead of one (I also have two independent circuits to plug them into). That way if one of the GFCI outlets trips I still have flow through the sump.
I also was not crazy about the RD5 controller. Maybe it's just not what I'm used to and unable to learn new.
I love my RD3's.
I would kill for a 150 watt.
 
I would guess that Scott Lief is no longer with them or they don't keep a USA presence anymore. He hasn't logged on in exactly a year as of today.


1794620580734.png
 
I would guess that Scott Lief is no longer with them or they don't keep a USA presence anymore. He hasn't logged on in exactly a year as of today.


1794620580734.png
I emailed Scott in August to get a replacement part for my old skimmer (which is no longer in production), and he had Torsten send me the correct part from Germany.
 
I also was not crazy about the RD5 controller. Maybe it's just not what I'm used to and unable to learn new.
I love my RD3's.
I would kill for a 150 watt.
I think I ahve a 130 or 150 that I could maybe let go. It could need parts though.

I got a few used ones and one of them binds up when I tighten the volute, but I can't remember which one. No clue why and I took it apart and put it back together and plumbed it in 5 times under duress, water everywhere, me approaching meltdown mode. No joke, it still sits partially assembled on the floor where I left it a year ago, too lazy to un-fish the umbilical out of the wire trays or put it on the bench and figure out what was wrong with it.
 
Also, the anti-calcification loop seals are getting fiddly on the quick connects on all of them. I do dislike how they built that.
 
Torsten is the RoyalExclusiv tech support guy in Germany. Scott is the support guy in USA. I can provide his contact info if anyone wants it.

Thanks, no need for me. I know who he is but if truth be told the last time I reached out I did not hear back. That is why I route communication via their web portal and get through support in Germany. They are always helpful. No complaints here.
 
Thanks, no need for me. I know who he is but if truth be told the last time I reached out I did not hear back. That is why I route communication via their web portal and get through support in Germany. They are always helpful. No complaints here.
I’m not comfortable with that given the cost. That said, I have never dealt with Deltec so have no idea how they’d be with parts and communication for the e-flows. The same with Abyyz, I just don’t know enough about them and the cost is even a tier higher.
 
I’m not comfortable with that given the cost. That said, I have never dealt with Deltec so have no idea how they’d be with parts and communication for the e-flows. The same with Abyyz, I just don’t know enough about them and the cost is even a tier higher.

Yep, and US support and product availability. That and is the US distributer. Small hang up I have with Abyzz unfortunately. For me.
 
Yep, and US support and product availability. That and is the US distributer. Small hang up I have with Abyzz unfortunately. For me.
Forgot about the US distributor, that’s also a non negotiable deal breaker for me at the price point.
 
Of the two, the VarioS-8 or the Sicce SDC 9.0 fits your goal. The 6 is too small.


Rated flow is at zero head, so you’ll get noticeably less once you add vertical lift and plumbing. The VarioS-6 tops out around 1,585 gph on paper, so it would be near max just to reach your 1,500-1,600 target. The VarioS-8 (around 2,100 gph max) and the SDC 9.0 (around 2,400 gph max) can hit that range at roughly 70-75% with room to spare.

Two other DC options in that range are the EcoTech Vectra M2 and L2. They’re quiet and app-controllable, but they cost more and have a shorter warranty.

Before you buy, check the manufacturer’s head-loss chart against your actual lift, fittings, and pipe size. Also check the sump or return chamber depth, since the pumps are fairly large. A controller with a feed mode or battery backup is a good idea, because DC pumps don’t restart on their own after a power loss on some models.

If you run two returns, a ball valve on each lets you balance the flow.
Thank you. Appreciate that reply, instead of someone wanting me to justify why I want DC!
 
Thank you. Appreciate that reply, instead of someone wanting me to justify why I want DC!
LOL. Please forgive my curiosity. (I think someone else put a lot more on my simple question that didn't help.)


Again sorry....
 
I use the MightyJet XL that came with my ext 112. Only run it at level 2.
Be careful using a pump intended for a protein skimmer as a return pump. Most protein skimmer impellers are a pin style with little pins, like a very coarse hairbrush. Those are very efficient with zero to very low head pressure. As a return pump, it will have 36" to 84" of head pressure; the needles have a much more significant loss due to head pressure than open- or closed-channel impellers, which are what you find in a true return pump. That is why Reef Octopus and other companies that make protein skimmers and return pumps have two variants of what seem to be the same pump. They use different impellers. FYI, we do have a trade-off to the open or closed channel impellers. They are heavier, have more rotational mass, and require more energy to spin at the same RPM. They also have more surface area that is potentially in contact with the volute wall.

Just a little FYI.
 
LOL. Please forgive my curiosity. (I think someone else put a lot more on my simple question that didn't help.)


Again sorry....

The OP thanked someone for a reply “instead of someone wanting me to justify why I want DC," directed at your behavior. You answered with “LOL” and a mocking apology, reframing what you did as just curiosity and a simple question, taken out of context by others.

Nobody put anything on you. You didn’t just ask a simple question. You told the OP DC efficiency is “overrated” and dismissed the safety difference between low voltage DC and mains in the water. Your misinformation was answered with facts. Reframing and mocking me and now “LOL,” and a mocking apology to the OP don’t change that. The thread stands as the record.

Laughing it off and recasting it after the fact doesn’t change what you posted.
 
Be careful using a pump intended for a protein skimmer as a return pump. Most protein skimmer impellers are a pin style with little pins, like a very coarse hairbrush. Those are very efficient with zero to very low head pressure. As a return pump, it will have 36" to 84" of head pressure; the needles have a much more significant loss due to head pressure than open- or closed-channel impellers, which are what you find in a true return pump. That is why Reef Octopus and other companies that make protein skimmers and return pumps have two variants of what seem to be the same pump. They use different impellers. FYI, we do have a trade-off to the open or closed channel impellers. They are heavier, have more rotational mass, and require more energy to spin at the same RPM. They also have more surface area that is potentially in contact with the volute wall.

Just a little FYI.
Its not a needle wheel pump. Its the pump IM delivers with their systems.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 3.2%
  • I decorate AROUND the tank or stand

    Votes: 4 12.9%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 22 71.0%
  • We don’t decorate for the holidays

    Votes: 4 12.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new