RODI filters

DatReefGuy

Active Member
View Badges
Joined
Jul 19, 2020
Messages
124
Reaction score
60
Location
Fitchburg
What state or country do you live in
Massachusetts
Rating - 0%
0   0   0
Hi all.

Does anyone else have issues with replacing the carbon block filter on your RODI system? It seems like I replace that more often than the sediment filter. It always causes issues and gets blocked more often than not. I just replaced both sediment in carbon filter two weeks ago and it’s already clogged again? The pressure gauge is reading 10 PSI when I normally run about 50-60PSI. I’m not sure what’s up.
 
Are you using a 1 micron or 5 micron sediment filter?
If you are already at 1 micron you could try to go down to a 0.5 micron sediment filter.
 
I am using 1 micron at the moment. Never had an issue until I had to replace the sediment filter for the first time. I’m assuming it was a snowball effect. You mean 5 micron correct?
 
I am using 1 micron at the moment. Never had an issue until I had to replace the sediment filter for the first time. I’m assuming it was a snowball effect. You mean 5 micron correct?
Nope I mean 0.5 that's 1/2 a micron.
I assume the sediment filter is before of the charcoal filter.
 
If your carbon block is clogging before your sediment filter, your sediment filter is too big. Get as small a micron size as reasonably possible. Carbon blocks are way too expensive to be filtering your sediment.
 
Nope I mean 0.5 that's 1/2 a micron.
I assume the sediment filter is before of the charcoal filter.
That is correct. I’m guessing that a .5 micron may have come with the system. Should I stick with a 1 micron carbon?
 
If your carbon block is clogging before your sediment filter, your sediment filter is too big. Get as small a micron size as reasonably possible. Carbon blocks are way too expensive to be filtering your sediment.
I agree with this. I’ll check and see what the stores around me have. I want to say a plumbing supply store would have something.
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 6 30.0%
  • Powerheads or wavemakers

    Votes: 2 10.0%
  • Sump or rear filtration chambers

    Votes: 2 10.0%
  • Skimmer or other filtration equipment

    Votes: 1 5.0%
  • Overflow or plumbing

    Votes: 6 30.0%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 2 10.0%
  • Other—tell us what I missed

    Votes: 1 5.0%
Back
Top
Home
Post thread…
Market
What's new