Rollermat

[MarineREEFpassion]

So I’m reaching out to any of my reefing friends that use either Clarisea, Bubblemagnus or AquaMaxx Rollermats. Has anyone plumbed one outside of your sump or is it even possible? I have the Eshopps ADV-300 sump and the compartment for the filter socks isn’t wide enough and I really don’t want to cut out the refugium if I don’t have to. It would totally take away the intended flow pattern of the sump. Any suggestions or ideas would be greatly appreciated.

 

[jwilliams860]

Those are all designed to run in sump I believe. Theiling roller mat could possibly be mounted to the side of the sump, you would have to drill holes in the side of the sump and mount it with the bulkheads. Trigger systems had a sump design that utilized the theiling roller mat on the outside

 

[MarineREEFpassion]

Those are all designed to run in sump I believe. Theiling roller mat could possibly be mounted to the side of the sump, you would have to drill holes in the side of the sump and mount it with the bulkheads. Trigger systems had a sump design that utilized the theiling roller mat on the outside

Cool thanks for the reply!

 

[jwilliams860]

https://www.bulkreefsupply.com/roller-mat-sump-30-trigger.html
Like this here

 

[jwilliams860]

You can see in the photo, the side view, you could essentially duplicate the holes in your sump and mount the rollermat

 

[MarineREEFpassion]

https://www.bulkreefsupply.com/roller-mat-sump-30-trigger.html
Like this here

Yeah I saw those they look nice. Unfortunately this sump I have is brand new also and everything is already plumbed up. It’s ok I ordered the Theiling rollermat and an just making its own shelf next to the sump for it to take over as the main line drains into it. Thanks for the idea!

 

[mikst]

Yeah I saw those they look nice. Unfortunately this sump I have is brand new also and everything is already plumbed up. It’s ok I ordered the Theiling rollermat and an just making its own shelf next to the sump for it to take over as the main line drains into it. Thanks for the idea!

Hello, what was the result of this? I'm working on an eshopps adv 300 and have a redsea rollermat 1200. Looking at various flow patterns and options. There's a sump removal kit that looks like it's meant to cut out baffles to make room for the rollermat. Not sure I want to go that way.

 

[dangles]

There would not be a way to run the ClariSea fleece rollers outside of the sump.