Salinity Discrepancy | Refractometer vs ATI ICP

  • Thread starter Thread starter Whasmack
  • Start date Start date
  • Tagged users Tagged users None

Whasmack

Active Member
View Badges
Joined
Oct 26, 2016
Messages
249
Reaction score
313
Location
Vancouver, WA
What state or country do you live in
Washington
Rating - 0%
0   0   0
So, I received my ATI ICP test results - and it says my salinity is super low?? 30.96PSU & it's supposed to be 35.0
I have 3 different refractometers that I've calibrated with BRS 1.026 solution and they all read my salinity at 1.026.
Has anyone else experienced this? Which one is correct?
1570113782167.png
 
I've used ATI and the first time it reported that my salinity was also low. Not to the degree what you report but it was low. I then bought a calibration solution, checked my digital tester, and low and behold ATI was correct and I was not.

I would send them an email. They reply pretty quick and just ask them about it and how you test at home and see what they say or suggest. In my case though their test was correct and spot on. I was low.
 
Ok - I'll see what they say. I will admit that I keep the solution in my tank rook; which is probably ~ 70 degrees. I think the solution says 25 C on it.
 
From ATI -
Unfortunately, your sample samples are no longer available, as we can only hold them for 7 days. However, I was able to look at the series of measurements from your sample water and could not detect any deviation or other errors. From the point of view of measurements, the salinity specified by us is correct. When looking at the analysis protocol is striking that there is a shift in the proportions in your aquarium. Meaning, Na and Cl are okay for salinity, but the other quantities are increased. In determining the salinity by us only Na and Cl are used, as they account for more than 85% in natural seawater. If it comes to a quantity shift, as you can see it, a measurement with a Refrakatormeter can show an increased, or a decreased Salinity. In your case now an increased.
 
Use RO on the 3 refractometers instead of the BRS 1.026 solution and calibrate the PPT's reading to 0. Then see what the reading is with the tank's water.
 
Last edited:
My ATI salinity results matched my Hanna Salinity checker almost exactly... for $60 it was the best investment ive made in a long time...
 
I'll recalibrate & check when I get home.

I was looking at that Hanna meter - as always BRS is out of it when I'm looking to buy .
 
Reading it with BRS standard is 35 PPT. Re-calibrating with RODI water shows a salinity of 30.5 PPT....
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 13.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 13.3%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 13.3%
  • Dry goods and restocks, like salt, media, or food

    Votes: 3 10.0%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 26.7%
  • Fish or other livestock

    Votes: 1 3.3%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.3%
  • I’m browsing, but don’t have a specific target

    Votes: 4 13.3%
  • I’m not shopping for reef deals this year

    Votes: 1 3.3%
  • Other (Post in the comments)

    Votes: 1 3.3%

New Posts

Back
Top
Home
Post thread…
Market
What's new