Salinity/Refractive Index Question

Pazernaker

Community Member
View Badges
Joined
Apr 8, 2022
Messages
89
Reaction score
152
Location
Southern NH
What state or country do you live in
New Hampshire
Rating - 0%
0   0   0
So this is a weird one and one I know I'm going to feel REALLY dumb for asking. I've been using my hand held store bought meter that I calibrated with a fluid still in date and have been getting a refractive index of about 1.025. No problems, everything is good.

I discover we have an expensive lab bench Anton-Paar Abbemat 500 found here. I think to myself, "Perfect, everyone should DEFINITELY know their salinity out to 6 decimal places!" Well, now I have more questions...

Readout for salinity came as follows:
Salanity, NaCl 3.56g/100g
RI SetTemp: 20.00 C
RI Temp: 20.00 C
RI Wavelength: 589 nm
RI 1.339163 nD

I re-ran it at 25C (because ambient) and came up with an RI of 1.338601. Sample size was about 3 ml's taken from my tank into a sterilized glass container 2 hours before testing. Light shaking was done to guarantee homogeneity. What am I missing here, and why am I not getting anywhere close to the refractive index as my calibrated hand unit? Is a salinity of 3.56g/100g in line with my measured 1.025 at home? If it matters, I use instant ocean reef salt and did a 20% water change a week and a half ago with RODI water from my LFS.

Thanks,
Ryan
 
So this is a weird one and one I know I'm going to feel REALLY dumb for asking. I've been using my hand held store bought meter that I calibrated with a fluid still in date and have been getting a refractive index of about 1.025. No problems, everything is good.

Are you sure your hand held meter is giving you the refractive index? I would assume it is giving you specific gravity. Seawater at 1.0264 SG has a refractive index of 1.3394
 
Are you sure your hand held meter is giving you the refractive index? I would assume it is giving you specific gravity. Seawater at 1.0264 SG has a refractive index of 1.3394
Jesus Christ, you're right... I knew there was something way off here.
 
I didn't make the solution of 3.56/100, that's one of the units of measure the device spit out for me when I tested my tank water.

Do you know whether it means 3.56 g per 100 g water, or 3.56 g per 100 g total?
 
I don't, I ran it on the salinity mode, so I assume it means 100g of test solution yields 3.56 grams of NaCl

If true, that gives it a seawater salinity equivalent of about 33.66 ppt, or a specific gravity of about 1.0253.
 
If true, that gives it a seawater salinity equivalent of about 33.66 ppt, or a specific gravity of about 1.0253.
OK, that's bang on what my refractometer at home says. How did you convert grams of salt/100 to specific gravity?
 
OK, that's bang on what my refractometer at home says. How did you convert grams of salt/100 to specific gravity?

The table I mentioned in my article linked above.
 
lol

I should also clarify that the 1.0253 is the sg of seawater matching that salt solution refractive index. It is not necessarily the sg of the salt solution itself, which is a little different.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new