Also filmtec is rated to 150psi so 100is totally fine. I also have 75 per day setup 6stage from BRS.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I've read 3 days is the magic number of lights out to get things in check. One more day dude! B
Salt I run my setup at 100psi. Membranes are cheap enough so if you suspect it being an issue than change it. They last a long time if you flush regularly. My tds in is currently 1700+ because I'm getting salt intrusion into my well. I get 26 after membrane so I get a great rejection rate. Using Dow film tec membrane. I also run my booster pump before the whole unit and not just before the membrane. .5 micron sediment than a tube of catalytic carbon than .5 micron carbon block. I have a dual DI setup and of course get zero tds water.
Really with 550 and a booster pump you should be able to get 2 tds after membrane and of course you should be at zero after DI.
Pete at aquafx is knowledgable and they have good prices on stuff. I just by my membrane from Amazon or BRS.
Let me know if you have any questions for me. Try boosting he pressure and also flush membrane for 15 min. See if you get a better reading.
This is my setup below
![]()
Also filmtec is rated to 150psi so 100is totally fine. I also have 75 per day setup 6stage from BRS.
Lol. Moonshine.
Cool. When that time gets closer I'll hit up some friends and see where you should go while there. I am clueless as to what is overt there.