Sauced and Confused (Lost Remix)

I assume most swimunders will require small/medium pieces pieced together which is why you requested more of those then large pieces yes? most rock likely wont come with enough space built in for something to already go under it.
 
Blow is an example of using the acrylic rod pinning method to make an island.
PXL_20230419_190318661.jpg


Below you can see a few different swim pass throughs just using stacked rock.

PXL_20230419_190325079.jpg
2 pieces on the island are pinned yeah? base + the top? rod through the middle?

also for stacked, I think the reason I didn't love it is I way always afraid it would fall apart down onto the fish or something would push it? Do you find this to be a thing?

having some space for coral growth would be ideal also
 
2 pieces on the island are pinned yeah? base + the top? rod through the middle?

also for stacked, I think the reason I didn't love it is I way always afraid it would fall apart down onto the fish or something would push it? Do you find this to be a thing?
correct
 
I assume most swimunders will require small/medium pieces pieced together which is why you requested more of those then large pieces yes? most rock likely wont come with enough space built in for something to already go under it.
Stacking rocks with only big rocks makes it look clunky. Makes transitions difficult.

Supplementing with the medium and smaller rocks gives you the ability to ensure everything fits together well. Has multiple points of contact and is secure, which speaks to your next question.

There is no rock in my tank which I am concerned about falling. When stocking rock you don't just put it down and leave it however it wants. You pick a rock (or a few rocks of the same general shape you were looking for ) the right general size and shape, Put it where you want it. Rotate it. Push up push down.. The goal is to nest each piece so that it is a secure base for the next level to go on top.
 
my preferred methods are stacked and (glue and sand)

For Losts tank we built an amazing honeycomb rockwork that allowed for maximum swim through for his fish with out the need for any permanent mounting. it was stacked. This was helpful for him when he needed to remove fish due to an unfortunate disease incident.

For my tank i have a combination. my original rockwork was glue / sand built and my most recent scape is just stacked.

I will be using a combo glue / sand and stacked on the final piece of scaping on the new 300 i just installed.
in fairness... most of your "stacked" is just one big A$% rock :winking-face: with a small out of little rocks around it.
 
in fairness... most of your "stacked" is just one big A$% rock :winking-face: with a small out of little rocks around it.
this is very true
 
do y'all have any products that you trust for both the glue and pin method?

I think there is probably some merit in drawing out some ideas from my head too maybe onto paper, but that being said probably have to be open to changing it based on the rocks you receive
 
My $0.02, you’ll find there is more room than you think in a 120, my only complaint about mine is getting my armpit wet when I have to reach down to the sand bed… but I’m short so… all of my rock is KP rock, about 60lbs dry and 25lbs of their starter, good stuff and going to be ordering more soon. My sump is a “store” bought, but I live in a townhouse and have little room to do diy stuff, but the next one will be diy. May 1st it will be 1 year wet.
12EE18C6-3F20-438B-BCFB-05C684C4AC34.jpeg
07ADA2BA-BD22-48EA-B1D4-F2D84086EE8D.jpeg
2FDC3010-5700-499C-81C0-F60AE8B17FC2.jpeg
5F661276-2407-4805-B904-7ECB4426B2AB.jpeg
11A0B633-E86F-4BED-8F08-E2D495961086.jpeg
 
do y'all have any products that you trust for both the glue and pin method?

I think there is probably some merit in drawing out some ideas from my head too maybe onto paper, but that being said probably have to be open to changing it based on the rocks you receive
i like glue masters thin super glue, but any super glue will do. just make sure you get thin.

https://gluemasters.com/collections...-with-protective-cap-medium-100-cps-viscosity
https://www.bulkreefsupply.com/nsa-...MI7JjK8da2_gIVcgizAB1eTg39EAQYAiABEgLgnfD_BwE
make sure you get a accelerator as well to cure the glue faster. you will be happy you did. or you can make one.
 
do y'all have any products that you trust for both the glue and pin method?
Purple reef safe epoxy, gel CA glue and quarter inch acrylic rod (Amazon prime eligible) are all that's really needed for wet
I think there is probably some merit in drawing out some ideas from my head too maybe onto paper, but that being said probably have to be open to changing it based on the rocks you receive
Another option would be hitting the Google machine, and searching for 120 gallon reef tank aquascapes.

Are some aquascape show off threads here.

Very easy to use those as inspiration.

I also drew out the footprint I wanted for my scape as well as the approximate profile, before ever touching the rock.
 
My $0.02, you’ll find there is more room than you think in a 120, my only complaint about mine is getting my armpit wet when I have to reach down to the sand bed… but I’m short so… all of my rock is KP rock, about 60lbs dry and 25lbs of their starter, good stuff and going to be ordering more soon. My sump is a “store” bought, but I live in a townhouse and have little room to do diy stuff, but the next one will be diy. May 1st it will be 1 year wet.
12EE18C6-3F20-438B-BCFB-05C684C4AC34.jpeg
07ADA2BA-BD22-48EA-B1D4-F2D84086EE8D.jpeg
2FDC3010-5700-499C-81C0-F60AE8B17FC2.jpeg
5F661276-2407-4805-B904-7ECB4426B2AB.jpeg
11A0B633-E86F-4BED-8F08-E2D495961086.jpeg
this scape seems to have a lot of nice negative space and places for fish to swim through
 
You can also go custom, to your specifications, often around the price of ready made, off the shelf tanks.

@Joe Glass Cages is a great contact in this field whether he builds the tank or not. Their website alone has a lot of styles and designs to get your creative juices flowing.
Really appreciate the support @Lost in the Sauce

thats right, here to support if we are not selected for the journey. we love this stuff!
 
i like glue masters thin super glue, but any super glue will do. just make sure you get thin.

https://gluemasters.com/collections...-with-protective-cap-medium-100-cps-viscosity
https://www.bulkreefsupply.com/nsa-...MI7JjK8da2_gIVcgizAB1eTg39EAQYAiABEgLgnfD_BwE
make sure you get a accelerator as well to cure the glue faster. you will be happy you did. or you can make one.
this NSA powder just goes over the compounds to hide it I assume right? sorry this is something I have never seen before
 
Really appreciate the support @Lost in the Sauce

thats right, here to support if we are not selected for the journey. we love this stuff!
I am currently in the market for a 120g tank, but kind of hamstringed by my LFS options (48"x2x2) and also the space it will be fitting into (I can go up to 64"x2x2. The LFS only has one option to choose from so I either go that route or find something online, which I believe is where he suggested you
 
I am currently in the market for a 120g tank, but kind of hamstringed by my LFS options (48"x2x2) and also the space it will be fitting into (I can go up to 64"x2x2. The LFS only has one option to choose from so I either go that route or find something online, which I believe is where he suggested you
62" x 24 x 24 would fit an aquatic life t5 hybrid over it Wonderfully.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new