Sauced and Confused (Lost Remix)

I was told "I dont love the idea but it's your area so do what you want" I am not sure how to take this comment, lol.... hmmmm. Sounds like a do it and then get yelled at for a bit until she realizes it was the right call to me
She will fall in love with it.... Everyone will.
 
Guess it’s time to see what kind of 180 6fts I can find and what the difference is. I guess outside of tank and rock you guys said mostly everything else from the 120 would work
 
I did not, though I do have a set of his plans for a Maloof rocker laying around somewhere that I hope to eventually use. The saw bench plans are from "Wood by Wright" and both of my Roubo's are generic based on YouTube videos.

A clean top? Pretty sure that's just a myth...

If you need a holding device near the back, I highly highly recommend Gramercy hold fasts. They will work anywhere you're willing to drill a dog hole. I use them more than either vise I think.

It's a gorgeous bench, you've got skill!
You mean a couple of these?

PXL_20230419_234128374.jpg


Hold fast are my number one thing to grab when I need something to stay put. I'd like to get a couple leather sleeves made for the contact area. They have never marred my work piece but I still would like it as a piece of insurance.

I built this a few months after the guild build finished. There were a few mods I wanted to make so didn't go directly off the plans.

I'd love to see a picture of yours.
 
Guess it’s time to see what kind of 180 6fts I can find and what the difference is. I guess outside of tank and rock you guys said mostly everything else from the 120 would work
Yes. Pretty much all kit for a 120 will be in the correct size range for a 180 as well
 
How much rock for a 180 assuming like 120-140lbs?
I would go with 40 pound box of dry Marco for the very bottom layer, 40 pounds of starter for the unseen but still beneficial to be alive stuff and 40 pounds of premium for what will be seen. Maybe 50...
 
I would say this is probably 100-120 lbs total
PXL_20220506_195944515.jpg
PXL_20220404_015523852.jpg


As you can see I don't like the wall of rock look. 6 ft long is plenty of length to have individual structures.
Likely more power heads for a 6ft too
 
Likely more power heads for a 6ft too
2 maybe 3 depending on where you place them what speed they are at and intensity of your return flow
 
You mean a couple of these?

PXL_20230419_234128374.jpg


Hold fast are my number one thing to grab when I need something to stay put. I'd like to get a couple leather sleeves made for the contact area. They have never marred my work piece but I still would like it as a piece of insurance.

I built this a few months after the guild build finished. There were a few mods I wanted to make so didn't go directly off the plans.

I'd love to see a picture of yours.

Yes sir! Aren't they handy, I use them constantly. Leather sleeves would be nice for sure, I just use a sacrificial piece of wood between them and the work piece.

Sure, though mine aren't nearly as pretty as yours. The first I made about 8 years ago, the second just recently. Still haven't decided on the vise setup for the new one but leaning towards the BC. (The old one has my normal "clean top" haha) bonus pictures of the saw bench and Dutch tool chest.

20211024_125617.jpg
20230419_185546.jpg


20220227_160618.jpg
20220305_183812.jpg
20220101_200604.jpg
 
Yes sir! Aren't they handy, I use them constantly. Leather sleeves would be nice for sure, I just use a sacrificial piece of wood between them and the work piece.

Sure, though mine aren't nearly as pretty as yours. The first I made about 8 years ago, the second just recently. Still haven't decided on the vise setup for the new one but leaning towards the BC. (The old one has my normal "clean top" haha) bonus pictures of the saw bench and Dutch tool chest.

20211024_125617.jpg
20230419_185546.jpg


20220227_160618.jpg
20220305_183812.jpg
20220101_200604.jpg
Looks nice, we just bought this house a year ago so I haven’t even finished the shop yet because of all the projects. Spent ages on cabinets and ******* doors over the last year

sidenote your area looks too clean
 
Yes sir! Aren't they handy, I use them constantly. Leather sleeves would be nice for sure, I just use a sacrificial piece of wood between them and the work piece.

Sure, though mine aren't nearly as pretty as yours. The first I made about 8 years ago, the second just recently. Still haven't decided on the vise setup for the new one but leaning towards the BC. (The old one has my normal "clean top" haha) bonus pictures of the saw bench and Dutch tool chest.

20211024_125617.jpg
20230419_185546.jpg


20220227_160618.jpg
20220305_183812.jpg
20220101_200604.jpg
That shop looks like a pleasure to work in..

I'm secretly keeping I think we have the same diston saws.

Who do you like for hand planes?
 
Looks nice, we just bought this house a year ago so I haven’t even finished the shop yet because of all the projects. Spent ages on cabinets and ******* doors over the last year

sidenote your area looks too clean

Thanks, only for pictures I promise! Haha
 
This is what a full green light looks like I guess lol
My fantastic @Mrs.F i s h y said the same thing we ended up with a 96 x 30 x 25... brought it home... she says it's 24 inches to short... ;) should have gone 10 feet...
 
My fantastic @Mrs.F i s h y said the same thing we ended up with a 96 x 30 x 25... brought it home... she says it's 24 inches to short... ;) should have gone 10 feet...
haha, I think I want to stick to 6 I could fit 8 here but then it would run up on the door more than I would want I think, plus I have a kid turning 16 in a few days (lord save me, so I need to save some money for a beater for him :P)
 
That shop looks like a pleasure to work in..

I'm secretly keeping I think we have the same diston saws.

Who do you like for hand planes?

Thanks!

My main user Disstons are a pair of D-23's from the 40's I believe.

Planes are a mixed bag. I started with some vintage users, but buy new most of the time now. Router plane and low angle jack are Veritas. #4 and block are Lie Nielsen. Standard #5 is a vintage "Bridge Tool Co" out of St. Louis. (Made by Seargant I believe) #7 is a cool vintage Siegley. I have a number of old Stanley's and woodies laying around as well that don't see much use these days.

How about you? (Sorry to derail your thread
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new