Screws for Radions

[mfinn]

Does anyone have a link to the screws that hold the ( all gens) Radion XR30's to the mounting x brackets?
I'm sure they are M5's,, 5 mm flathead phillips, black.

Anyone have 12?

 

[Fishingandreefing]

Give them a call, if I remember correctly it was either free or just pay shipping.

 

[mfinn]

Give them a call, if I remember correctly it was either free or just pay shipping.

I did actually call them this morning and asked about the size and I did mention I was going to look for some online.
I didn't ask outright, but gave the rep every opportunity to offer them, or give me anything.
I am a little hesitant to ask to buy them. The difference between the 2 different slide kits is $11. One has the screws, the other ( that I have) doesn't. There are the eyelets available at $12.60 for 4. Then add the $11.79 for shipping,,,,,,,,,,,,,,,,,,

Since it wasn't offered, and I had to buy screws from them, at best I'd be looking at something around $45 for 3 sets.
Plus the week+ waiting for them.

Amazon or somebody should have something that will look normal.
I'm just not finding them atm.

 

[Haacheew]

I need the same information.

I am planning to make a Radion xr15 G5 DIY wall mount before getting the xr15 G5 and need some dimensions.
1) A, and B distance in inch (center-to-center between the 2 holes).
2) Size ( and part number?) of the screw fits those 4 holes. (Going to use screw similar to DenisK's Hydra 52 DIY wall mount. But I will need the screw size that fits my xr15 G5.)

Attached are some of DenisK's Hydra 52 DIY wall mount. My xr15 G5 will be similar. If you interested his project, here is the link
https://www.reef2reef.com/threads/diy-led-wall-mount-check-it-out.363438/

3) Where can I buy this adapter? Does anyone here make or sell it?

 

[ADAM]

M5-0.8 X (length) I had to lengthen my screws for clearance using the Ecotech Radion Articulating Mounts

https://www.lowes.com/pd/Hillman-5mm-0-8-x-30mm-Allen-Drive-Cap-Screws-2-Count/3024668

 

[ADAM]

Does anyone have a link to the screws that hold the ( all gens) Radion XR30's to the mounting x brackets?
I'm sure they are M5's,, 5 mm flathead phillips, black.

Anyone have 12?

Lowes, Home Depot, or similar should have them on hand.

 

[mfinn]

Lowes, Home Depot, or similar should have them on hand.

Finding a shorter ones like 5mm is the issue.
Plus I'm trying to shop online.

 

[Haacheew]

M5-0.8 X (length) I had to lengthen my screws for clearance using the Ecotech Radion Articulating Mounts

https://www.lowes.com/pd/Hillman-5mm-0-8-x-30mm-Allen-Drive-Cap-Screws-2-Count/3024668

@ADAM, you're THE MAN!

 

[ADAM]

Finding a shorter ones like 5mm is the issue.
Plus I'm trying to shop online.

I should have the screws that I took out of my 3 Radions when I swapped them for the longer ones. Are they what your looking?

 

[canadianeh]

Does anyone have a link to the screws that hold the ( all gens) Radion XR30's to the mounting x brackets?
I'm sure they are M5's,, 5 mm flathead phillips, black.

Anyone have 12?

I finally found the screws. Check it out at my DIY light mount for picture and more information :)

 

[ADAM]

@mfinn Found them. If these that I have will work for you PM me your address and they’re yours.

 

[mfinn]

@mfinn Found them. If these that I have will work for you PM me your address and they’re yours.

Thanks
Sent you a pm