Show me your plumbing

  • Thread starter Thread starter recess62
  • Start date Start date
  • Tagged users Tagged users None
Absolutely love the Facebook cover pic!! Rofl!!
eb2e45c06a4033014f132f4e2f003e40.jpg



It's a real eye catcher! Ha!
 
Can someone share what is the glue that need to be used ? :)
Pvc primer and cement. You can get clear primer which I recommend because the purple stuff is ugly and goes everywhere
 
Can someone share what is the glue that need to be used ? :)
Pvc primer and cement. You can get clear primer which I recommend because the purple stuff is ugly and goes everywhere
you don't need pvc primer for aquarium applications which are not high pressure. save yourself the hassle and time. red can (oatey) pvc cement dries clear for a pro clean job.
 
you don't need pvc primer for aquarium applications which are not high pressure. save yourself the hassle and time. red can (oatey) pvc cement dries clear for a pro clean job.
Good to know for next time. I had to paint over the purple!
 
I rarely disagree but primer is needed. In order to get the best bond possible the pipe needs to be clean, that's what primer does. Primer does come in clear also so there that option. Ordinary house plumbing is required for the primer/solvent combo and is actually under far less stress than your aquarium plumbing, yes I said far less. Under tank plumbing is subject to heat, vibrations, light, and let's not forget saltwater. Typical house plumbing only sees water once per hour and not very much of it. Build your tanks plumbing with the intent on it lasting forever and you'll thank yourself later.
 
Agree with using primer - the clear stuff. The purple only shows inspectors that the primer was used, as per code. The purple really looks messy on aquarium plumbing. I have always used primer (30+ years).
 
Good to know for next time. I had to paint over the purple!

Even if you use primer, you dont need to use the purple, just get the clear.
Second, just prime an inch or so of the pipe, so the purple wont show.
 
I rarely disagree but primer is needed. In order to get the best bond possible the pipe needs to be clean, that's what primer does. Primer does come in clear also so there that option. Ordinary house plumbing is required for the primer/solvent combo and is actually under far less stress than your aquarium plumbing, yes I said far less. Under tank plumbing is subject to heat, vibrations, light, and let's not forget saltwater. Typical house plumbing only sees water once per hour and not very much of it. Build your tanks plumbing with the intent on it lasting forever and you'll thank yourself later.

I Agree.
 
Why can't everyone in my day to day life be passionate reefers like all ya'll? I tell everyone I am a Reef tank junkie hoping to find someone like me - 10+ years in the hobby and still do not find anyone.. Thank god for R2R and seeing all the amazing tanks and sumps.. i know what you thinking b/c I am ordering blue pvc to match my blue and white sump =)
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new