Single outlet on powerbar

[Michael Gray]

Right now I have 2 ghl outlet bars. I think all are used. I'm trying to condense. Atleast open up 1 outlet for a future calcium reactor. The kamoer and recirc pump can go on a outlet that stays on 24/7. Like my ato and breeze fan outlet. But I need an open outlet for my co2. I noticed I have my mitras lx7s on their own outlets. Can I put them on the same outlet. Or is that not a good idea??

 

[ingchr1]

Do your lights need to be on the Powerbars? I just use a smart WiFi powerstrip for mine.

I have two 5.1 Powerbars and all of the controlled outlets are occupied by other devices.

 

[Michael Gray]

Well I only have one receptacle behind tank so I have one of the ghl 6 outlet bars plugged in one top and 1 6 outlet ghl on bottom one. And those bars are under my stand in dry area. I'm just curious if both mitras can safely be ran on one of the switched outlets with a adapter.

 

[Lasse]

2 Mitras = around 400 W. If the same powerbar manage 2 outlets it should manage with one outlet too -
as long as the total load not exceeds your fuse.

Sincerely Lasse

 

[Michael Gray]

2 Mitras = around 400 W. If the same powerbar manage 2 outlets it should manage with one outlet too -
as long as the total load not exceeds your fuse.

Sincerely Lasse

Good to know. Now I have an open outlet for future carx!