Skimmer issues

iplumbsome

Active Member
View Badges
Joined
Nov 3, 2017
Messages
184
Reaction score
78
Location
Burlington, WI
What state or country do you live in
Wisconsin
Rating - 0%
0   0   0
260 gallon tank
20+ fish
15 coral (1 sps)
ASM G4 XX skimmer with stock sedra pump

I know there are a lot of variables but shouldn't I be getting more than about a 1/4" depth of skimmate in my collection cup a week?
 
260 gallon tank
20+ fish
15 coral (1 sps)
ASM G4 XX skimmer with stock sedra pump

I know there are a lot of variables but shouldn't I be getting more than about a 1/4" depth of skimmate in my collection cup a week?
That doesn't sound like much, what do your nitrates and phosphates look like?
 
Also, how are you skimming? Wet or dry? When I skim wet in my 75 with my 4 fish I get about 2 inches but when I skim dry it's about 1/2 an inch.
 
Haven't checked phosphate for awhile but my nitrates are starting to creep up to about 35. Tank has been running for 1 year.
 
How long has the skimmer been running? Did it work better in the past?
Tank is a year old. It never pulled much but I never really had much of a bio load starting out. My nitrates have been climbing.
 
Tank is a year old. It never pulled much but I never really had much of a bio load starting out. My nitrates have been climbing.
Maybe some adjustment is needed on it, do you have a pic of what it looks like in operation?
 
Maybe some adjustment is needed on it, do you have a pic of what it looks like in operation?
Not a great pic
20190421_214949.jpeg
 
Not a great pic
20190421_214949.jpeg
It is quite hard to tell from the pic if it's adjusted right. There are a ton of videos on YouTube telling of different ways to adjust them, I like to take the collection cup off of mine and adjust the foam level right to the top of the neck on the skimmer body and then put the cup back on
 
what I would do is clean the entire skimmer in a vinegar bath and let it soak for a bit. After a good rinse put it back and start tuning to the point where the foam is right at the top of the neck of the skimmer about to go into the cup
 
It is quite hard to tell from the pic if it's adjusted right. There are a ton of videos on YouTube telling of different ways to adjust them, I like to take the collection cup off of mine and adjust the foam level right to the top of the neck on the skimmer body and then put the cup back on
Looks like we had the same idea of where the foam should be :)
 
It is quite hard to tell from the pic if it's adjusted right. There are a ton of videos on YouTube telling of different ways to adjust them, I like to take the collection cup off of mine and adjust the foam level right to the top of the neck on the skimmer body and then put the cup back on
That's what I have.
 
what I would do is clean the entire skimmer in a vinegar bath and let it soak for a bit. After a good rinse put it back and start tuning to the point where the foam is right at the top of the neck of the skimmer about to go into the cup
I will try that this week.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.0%
  • I decorate AROUND the tank or stand

    Votes: 4 16.0%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 16 64.0%
  • We don’t decorate for the holidays

    Votes: 4 16.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new