Skimmer Problems

  • Thread starter Thread starter Sweegin
  • Start date Start date
  • Tagged users Tagged users None

Sweegin

New Member
View Badges
Joined
Jan 13, 2024
Messages
8
Reaction score
0
Location
Parkland County
What state or country do you live in
Canada
Rating - 0%
0   0   0
my skimmer is the reef octopus SSS-3000 int. It is not bubbling and I took apart and checked everything and cleaned the plastic disc etc and nothing is broke. Put back together and still nothing. Any suggestions is my pump no good? My skimmer is about 8 years old and I have never had issues until now. I have taken all apart and cleaned it and also pour boiling hot water down the Venturi tube and what sits in there and does not drain but there is defiantly nothing blocking inside the tube. is my skimmer toast?

Any help would be great!
 
my skimmer is the reef octopus SSS-3000 int. It is not bubbling and I took apart and checked everything and cleaned the plastic disc etc and nothing is broke. Put back together and still nothing. Any suggestions is my pump no good? My skimmer is about 8 years old and I have never had issues until now. I have taken all apart and cleaned it and also pour boiling hot water down the Venturi tube and what sits in there and does not drain but there is defiantly nothing blocking inside the tube. is my skimmer toast?

Any help would be great!
Have you washed the venturi in acid?
 
Upvote 0
my skimmer is the reef octopus SSS-3000 int. It is not bubbling and I took apart and checked everything and cleaned the plastic disc etc and nothing is broke. Put back together and still nothing. Any suggestions is my pump no good? My skimmer is about 8 years old and I have never had issues until now. I have taken all apart and cleaned it and also pour boiling hot water down the Venturi tube and what sits in there and does not drain but there is defiantly nothing blocking inside the tube. is my skimmer toast?

Any help would be great!
Blow thru the tube from the muffler to the pump - Often that gets clogged
 
Upvote 0
I just tried blowing through the muffler but, no air is moving and feels like I am going to blow a vessel lol
Thats the issue- Its blocked. Take the tube off and clear the other end with a toothpick
 
Upvote 0
Thats the issue- Its blocked. Take the tube off and clear the other end with a toothpick
thanks for you help. I took a toothpick and chips away but, was strong enough so I used a little screw driver and then the piece broke way and I was able to blow through it. Put in my sump and plugged it in and it is working like new. Is there something that a person should be doing to prevent this? I have heard to put a skimmer in a vinegar/water solution and run it for 24 hours in a tub but, not sure how that keeps the Venturi clear.
 
Upvote 0
thanks for you help. I took a toothpick and chips away but, was strong enough so I used a little screw driver and then the piece broke way and I was able to blow through it. Put in my sump and plugged it in and it is working like new. Is there something that a person should be doing to prevent this? I have heard to put a skimmer in a vinegar/water solution and run it for 24 hours in a tub but, not sure how that keeps the Venturi clear.
Check it periodically. I sold these units at my LFS and found out the hard way. Glad to hear, back in business.
 
Upvote 0
Check it periodically. I sold these units at my LFS and found out the hard way. Glad to hear, back in business.
@VG nicely done
1727032576640.png
 
Upvote 0

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 11 15.7%
  • Fish or coral food

    Votes: 4 5.7%
  • Test kits or reagents

    Votes: 6 8.6%
  • Filter media or replacement fleece

    Votes: 4 5.7%
  • RO/DI filters or supplies

    Votes: 11 15.7%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 8 11.4%
  • I keep a backup of everything

    Votes: 20 28.6%
  • Other (Post in the comments)

    Votes: 6 8.6%
Back
Top
Home
Post thread…
Market
What's new