Something wrong with 2 of my sps?

Noobreefer84

Community Member
View Badges
Joined
Oct 5, 2024
Messages
46
Reaction score
17
Location
Vancouver
What state or country do you live in
Canada
Rating - 0%
0   0   0
Hello friends

Can anyone let me know if my sps are in trouble.

Water peramiters are below:
Alk: 7.3 (trending down so I increased dosing)
CAL: 480
No3: 9.8
PO4: 0.10 - 0.03
Mag: 1400
Salinity: 1.026

IMG_7863.jpeg


Thanks so much
 
That doesn't look good.
Agreed
Tell us more OP. Need more context.

To me, it's happening on one side or the under sides. That says light, Eh, or blasting from a power head. Also, Eh.
If be looking for bugs, blasting of power heads, par, swings(possibly).
 
Last edited:
RTN or STN... probably a parameter swing (alk or salinity).
yah, I noticed my alk over the last month and a half slowly dropping from 9 to 7.2. And I tested my salinity yesterday and it got up to 1.029 without me noticing.

Im going to assume those 2 things kicked both of them into RTN cause they were fine a few days ago and now they are basically melted.

I adjusted my doser to keep myself around 8.5 Alk and fixed my salinity.
 
yah, I noticed my alk over the last month and a half slowly dropping from 9 to 7.2. And I tested my salinity yesterday and it got up to 1.029 without me noticing.

Im going to assume those 2 things kicked both of them into RTN cause they were fine a few days ago and now they are basically melted.

I adjusted my doser to keep myself around 8.5 Alk and fixed my salinity.
More SG than alk is my guess. 7.2 alk is not anything to worry about.
 
I agree that it might have been caused by your salinity swinging to 1.029. Alk of 7.2 is low but isn't the worst
 
Oh yah. I figured it out. I put a small nano submersible UV in the tank to help with Dino’s. But the UV had a clear “window” to show you that the UV bulb was on.

Well at night with the lights off and the UV running. The “window” was only a few inches from those 2 corals and was blasting them with pure UV all night causing the tissue damage.

I covered the window and ripped the corals off. I was able to save one of them as there was enough left for a frag. But the other died. However part of the sps that encrusted on the rocks stopped dieing and is actually recovering on the rocks themselves.
 
Oh yah. I figured it out. I put a small nano submersible UV in the tank to help with Dino’s. But the UV had a clear “window” to show you that the UV bulb was on.

Well at night with the lights off and the UV running. The “window” was only a few inches from those 2 corals and was blasting them with pure UV all night causing the tissue damage.

I covered the window and ripped the corals off. I was able to save one of them as there was enough left for a frag. But the other died. However part of the sps that encrusted on the rocks stopped dieing and is actually recovering on the rocks themselves.
That's a bummer but also interesting impressive ya noticed that!
 

TOP 10 Trending Threads

WHAT MOST EARNS A REEFING BUSINESS YOUR "BEST OF THE BEST" NOMINATION?

  • Excellent livestock or product quality

    Votes: 23 30.3%
  • Honest listings and accurate expectations

    Votes: 8 10.5%
  • Helpful, knowledgeable customer service

    Votes: 6 7.9%
  • Standing behind a product when something goes wrong

    Votes: 16 21.1%
  • Fair prices and good value

    Votes: 10 13.2%
  • A unique selection or innovative products

    Votes: 0 0.0%
  • Supporting the reefing community or sustainability

    Votes: 0 0.0%
  • Consistent quality over time

    Votes: 12 15.8%
  • Other (Post in the comments)

    Votes: 1 1.3%
Back
Top
Home
Post thread…
Market
What's new