SPS & Peroxide

CastAway

Prone to wander, never lost.
View Badges
Joined
Jun 9, 2013
Messages
4,457
Reaction score
3,108
Location
Knoxville TN
Rating - 0%
0   0   0
Ive heard of dipping zoa frag plugs in peroxide to get rid of nuisance algae; typically a 50/50 ratio of 3% peroxide to salt water.

But, I want to know if this can be done for SPS frags as well, or, if there's anything that cannot be dipped in peroxide.

Thanks in advance for your help.
 

apex003

Aquaculturist in training
View Badges
Joined
Mar 12, 2007
Messages
334
Reaction score
138
Location
Southlake, TX
Rating - 0%
0   0   0
I've done whole tank treatment with peroxide at 2ml per gallon with lots of SPS. Some don't like it and get sort of dim, but recover after a couple weeks. Assuming things are healthy going into the dip, it should be fine. I have tons of SPS and they all do pretty well. My candy cane (LPS) always has the worse reaction but quickly recover.
 

Mattrg02

Valuable Member
View Badges
Joined
Jun 20, 2015
Messages
1,620
Reaction score
1,080
Rating - 0%
0   0   0
I've dipped many sps frags with peroxide. Most get ***** for a few weeks, then recover. Some don't, so don't try it on a rare coral.
 

joseserrano

2500 Club Member
View Badges
Joined
Jul 1, 2014
Messages
3,334
Reaction score
1,546
Location
Santa ana, CA
Rating - 0%
0   0   0
the coral will outgrow the algae usually, if the algae is not out of control. I get algae on my new plugs, but coral eventually encrust over it
 

brandon429

what, exactly, are you doing in your avatar
View Badges
Joined
Dec 9, 2014
Messages
31,035
Reaction score
23,923
Location
tejas
Rating - 0%
0   0   0
there's a difference between using peroxide on corals like zo's vs sps

zos are listed in the peroxide thread as totally resistant, no pattern of loss, and the toughest among all kept corals actually to any harm from it

sps are tolerant, but not injury-free, so we don't dip those

indication and location of algae, post a pic

my sps never have algae on the skin....its on the edges of the hard frag, not the skin.

zo's are known to have substrate inclusions, anchor points, in the flesh and the flesh is thick enough to be an actual anchor point likely due to dermal thickness preventing immuno or chemo responses from preventing algae attachment like is done when other coral flesh resides in a spot some algae wants (nobody posts pics of algae in the mouth of their acan, for example, unless it was a recession point before the invasion)

I scrape those areas free with a knife tip, forcefully and surgically, then peroxide the cleaned former anchor points directly, where it doesn't touch the polyp, since no algae was on the polyp.

with zo's, you still use tweezers and debride the algae free, never skip the manual work step for having farmed it or bought it farmed

the manual removal is the change-maker, the peroxide is only for former bad spot cellular cleanup/ideal and this prevents flesh contact in all sensitive new frags. zo's are tough if they're not in current challenge/decline/tall hdr profile/not connected/lanky/those are subject to die at anytime. zoas are flat, colonial densely connected animals when in health.
 
Last edited:

reefndude

Valuable Member
View Badges
Joined
Oct 19, 2013
Messages
1,328
Reaction score
563
Location
Georgia
Rating - 0%
0   0   0
I've tried a couple of sps frags with a peroxide dip just to try. It was about a 50/50 concentration. Both did lose color but survived and are recovering.
Reason I tried it out because I received them with suspected aefw on them. Never saw bugs on them again
 

SneaksMcdoogle

Active Member
View Badges
Joined
Jan 10, 2023
Messages
203
Reaction score
115
Location
Cape Coral
Rating - 0%
0   0   0
Ive heard of dipping zoa frag plugs in peroxide to get rid of nuisance algae; typically a 50/50 ratio of 3% peroxide to salt water.

But, I want to know if this can be done for SPS frags as well, or, if there's anything that cannot be dipped in peroxide.

Thanks in advance for your help.
Justin Credabel's hydrogen peroxide dipping guidelines

Tolerance
Dip 5 minutes Milliliters of Hydrogen Peroxide 3% to 1 Liter of Seawater. Type of Cnidarian

Low 20-40ml
Acropora (tolerance varies widely among species), Montipora, Astreopora, Duncanopsammia, Turbinaria, Galaxia, Cyhpastrea, (*Alveopora)(**Hydnophora) Echinophyllia, Mycedium, Oxypora, Tubastrea,

Low/Med 50-70ml
Pocillopora, Seriatopora, Stylophora, Caulastrea, Clavularia, Pachyclavularia, Sympodium, Cespitularia, Yellow Leathers, Pachyceris, Echinpora, Leptoseris, Pectinia, Psammacora

Medium 80-120ml
Porites, Xenia, Brown Leathers, Pavona, Fungiids, Heliofungia,

Med/High 130-200ml
Goniopora, Favia, Favites, Goniastrea, Platygyra, Leptastrea, Blastomussa, Cynarina, Physogyra, Plerogyra, Symphyllia, Sinularia, Corallimorpharian (Mushroom Anemone)

High 210-350ml
Zoanthids, Palythoa, Scolymia, Acansthstrea, Micromussa, Lobophyllia, Euphyllia, Catalaphyllia, Trachyphyllia,

Coral can be dipped longer in a lower concentrate solution. ? concentrate for up to 20 minutes for deep, persistent algae or bacterial infections, or necrotic areas.
 

TOP 10 Trending Threads

HOW DO YOU ADJUST YOUR CUC AS ALGAE DISAPPEARS?

  • Capture and re-home CUC

    Votes: 1 10.0%
  • Increase white light/hours in tank to spur algae growth to feed CUC

    Votes: 1 10.0%
  • Feed nori to support CUC

    Votes: 3 30.0%
  • Feed herbivore pellets to support CUC

    Votes: 1 10.0%
  • Allow attrition to balance CUC and algae

    Votes: 6 60.0%
  • Provide macro algae to feed CUC

    Votes: 1 10.0%
  • Introduce CUC predators

    Votes: 0 0.0%
  • Other (please explain)

    Votes: 1 10.0%
Back
Top