Stand slightly too big?

[Cyat]

Hey there guys, we're in the process of setting up a 29 gallon glass tank and we wanted to get a stand that was slightly bigger than the tank itself. I totally spaced on the physics involved in supporting the weight of this thing, and while the front and rear edges line up, there's about a 2.5" space between the sides of the stand and the edge of the tank.

Is this going to be okay with such a small tank, or is this a deal breaker for the setup? Any information/suggestions are fully appreciated.

Thanks for your help

 

[vetteguy53081]

That is supportive of the tank and perfectly fine
You can place a layer of wood exact fit on top for added stability

 

[Cyat]

That is supportive of the tank and perfectly fine
You can place a layer of wood exact fit on top for added stability

So you're thinking like a layer of wood cut to the size of the stand to disperse the weight of the tank rim more evenly?

 

[piranhaman00]

No issue at all

 

[vetteguy53081]

So you're thinking like a layer of wood cut to the size of the stand to disperse the weight of the tank rim more evenly?

Yes

 

[Cyat]

Yes

Thanks for the answer, do you have any suggestions on what type of material to put there?

 

[Cyat]

No issue at all

Thanks for the response. So you think the layer of wood between the stand and the tank is unnecessary?

 

[piranhaman00]

Thanks for the response. So you think the layer of wood between the stand and the tank is unnecessary?

Completely , if it makes you feel better go for it :)

 

[flagg37]

Completely , if it makes you feel better go for it :)

Agreed. That is what the top piece of wood on the stand is doing.

 

[vetteguy53081]

Thanks for the answer, do you have any suggestions on what type of material to put there?

plywood and stain/varnish it

 

[DCR]

Is the top of the stand a solid piece of wood or just a rim? If it is just a rim, I would suggest a solid layer of wood over the rim. The cantilever effect of the weight on the edge of the rim not being over the vertical sides could be excessive and cause it to fail.

Edit: I missed that it is only on the sides. You should be fine with the support on the front and back