Switching from Kalkwasser to 2 part?

  • Thread starter Thread starter cincyreef
  • Start date Start date
  • Tagged users Tagged users None

cincyreef

Active Member
View Badges
Joined
Nov 7, 2014
Messages
242
Reaction score
117
Location
Cincinnati, Ohio
Rating - 0%
0   0   0
Hi all. I'm debating switching from Kalk to a 2 part through a doser. I'm old school and have always used Kalk, but my sand is always hardening. I have a few concerns if I switch. If I do, how do I know how much to dose?From what I've read you dose equal amounts of each solution.

Also, what is causing my sand to keep hardening? I'm using Kalk in my ATO, so I have no way to really control how much I use daily, it's all through evaporation. My ATO is 1.5 gallon container in which I add 3 teaspoons of Kalk too. Any help is appreciated.

This is for a 29 biocube mixed reef btw. My tank is rather crowded, but it's mostly just frags.
 
How much volume do you think you dose each day? From that we can calculate a two part dose.

Equal parts dosing base don the alk needs of the tank will give about what the limewater was, and you can tweak the calcium up or down a bit over the long term to hkeep it in a reasonable range. :)
 
How much volume do you think you dose each day? From that we can calculate a two part dose.

Equal parts dosing base don the alk needs of the tank will give about what the limewater was, and you can tweak the calcium up or down a bit over the long term to hkeep it in a reasonable range. :)

I seem to evaporate about 1/2 gallon a day. My alkalinity is fluctuating quite a bit as well. This is another reason I'm wanting to switch to the 2 part, as to try to dial it in for more steady parameters. I use 2 tspns of Kalk per gallon of water. Hopefully this helps.
 
About 41 ml per day of both parts should about amtch that 1/2 gallon dose of limewater.

The lower ph you get with the two part may help reduce the sand hardening, and be sure to check and supplement magnesium as it may help with the sand as well as other issues.
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 11 18.6%
  • Powerheads or wavemakers

    Votes: 5 8.5%
  • Sump or rear filtration chambers

    Votes: 9 15.3%
  • Skimmer or other filtration equipment

    Votes: 8 13.6%
  • Overflow or plumbing

    Votes: 10 16.9%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 15 25.4%
  • Other—tell us what I missed

    Votes: 1 1.7%
Back
Top
Home
Post thread…
Market
What's new