Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I want to do this so bad. Any updates, and pics
Could it be a bluefish mini issue. The only other person I read do this said it worked but to only 10% then off. What's the next step. I can see if I can find the post for you. If you haven't read it already.The white channel on the two slave units are at 100% all the time. When I adjust the channel 1 percentage in the app it doesn't change the intensity of the whites at all just the blues. So the bluefish minis working for the blues but the whites are "dimming" by adjusting the blue intensity.
Could it be a bluefish mini issue. The only other person I read do this said it worked but to only 10% then off. What's the next step. I can see if I can find the post for you. If you haven't read it already.
The one I found was only one. But the other channels shouldn't be any different that's why I was thinking faulty controller. Does bluefish have tech supportIt worked great for one unit but didn't dim the slave units correctly when all three were hooked up. I can't find any walk-throughs on wiring up more than one unit.
Did you follow these steps exactly? Any pointers?I really appreciate your information and diagram, hooked a bluefish up and it's working just fine
1
So I fallowed the diagram and it was pretty strait forward, although a little stressful, not knowing how exactly it all worked (not having much experience with the inner workings of electronics). I used Adafruit Accessories Female/Female Jumper Wires - 40 x 12" from Amazon, they worked pretty good, although the side that connects to the Bluefish secured nicely, they felt very loose on the internal board of the t247. After fitting everything together and splicing the PWM black wires, I did a test run and to my amazement it all worked. I soldered the wires to the PWM black wires, and added some hot glue to the cables coming into the t247 to get them more secure.Did you follow these steps exactly? Any pointers?
Can a mod like this be used on a blue and white led box with a factory built in timer?