I’m unsure. I can try to find a video of what I saw under microscope. The snails dying with the other symptoms is what made me feel Dino. At lights out it also isn’t as noticeable but they may be the same for both?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I looked up different pictures of things from saltwater under a microscope, and the best matching image I can find is this post from someone back in 2019, but there wasn't much response to it. They did, however, say Coolia and Ostreopsis. There isn't much on Coolia; someone said they dosed a ton of Seachem Reef Phosphorus, which is what I started today, but using Neophos. Mentioned for Ostreopsis to use UV. Perhaps a combination of the silicates, Neophos, and UV would knock it out?400 is usually plenty for dinoflagellates. I assume it's a small Amphidinium species if you struggle to see much. They should move like little roombas.
It's interesting because your substrate looks like the main culprit are diatoms:
https://www.reef2reef.com/threads/microscopy-thread.1138845/post-14434575
The bubbles aren't always indicating dinos as diatoms are photosynthetic as well. However the mucus dinos produce keeps bubbles trapped much better so most people don't see bubbles during diatom blooms too often. Amphidinium usually prefers the substrate over rocks so I'm wondering if you have multiple species or if you have both diatoms and dinos which is also common.
All our treatment methods are rather experimental so far, so I would say go for it and try aroundI looked up different pictures of things from saltwater under a microscope, and the best matching image I can find is this post from someone back in 2019, but there wasn't much response to it. They did, however, say Coolia and Ostreopsis. There isn't much on Coolia; someone said they dosed a ton of Seachem Reef Phosphorus, which is what I started today, but using Neophos. Mentioned for Ostreopsis to use UV. Perhaps a combination of the silicates, Neophos, and UV would knock it out?400 is usually plenty for dinoflagellates. I assume it's a small Amphidinium species if you struggle to see much. They should move like little roombas.
It's interesting because your substrate looks like the main culprit are diatoms:
https://www.reef2reef.com/threads/microscopy-thread.1138845/post-14434575
The bubbles aren't always indicating dinos as diatoms are photosynthetic as well. However the mucus dinos produce keeps bubbles trapped much better so most people don't see bubbles during diatom blooms too often. Amphidinium usually prefers the substrate over rocks so I'm wondering if you have multiple species or if you have both diatoms and dinos which is also common.

When looking at substrate I see diatoms. I am with you on both Dinoflagellets & diatoms.400 is usually plenty for dinoflagellates. I assume it's a small Amphidinium species if you struggle to see much. They should move like little roombas.
It's interesting because your substrate looks like the main culprit are diatoms:
https://www.reef2reef.com/threads/microscopy-thread.1138845/post-14434575
The bubbles aren't always indicating dinos as diatoms are photosynthetic as well. However the mucus dinos produce keeps bubbles trapped much better so most people don't see bubbles during diatom blooms too often. Amphidinium usually prefers the substrate over rocks so I'm wondering if you have multiple species or if you have both diatoms and dinos which is also common.
Is there a particular UV you would recommend? I started dosing neophos over the weekend. My silicates comes in today so I will start that. Should I get a media reactor for the carbon or would those carbon bags thrown in my filter sock work? I had a 7" rectangular filter sock originally but replaced it with a 3D printed 4" filter cup so I could just drop bags of chemipure and use loose filter floss. I switched back to the filter socks as I was afraid maybe the cup wasn't filtering enough.UV will help, but in the short run dosing phosphates and running activated carbo will also slow dow or stop actual damage that's happening to corals and cleanup crew.
For max results the Uv pump should be in the display where the bloom is happening. It does not have to be permanently installed if that is convenient.
If you choose an appropriate carbon (pelleted) you should be able to run it loose in the filter sock. In-a-bag-in-the-filter-sock at the very most.Is there a particular UV you would recommend? I started dosing neophos over the weekend. My silicates comes in today so I will start that. Should I get a media reactor for the carbon or would those carbon bags thrown in my filter sock work? I had a 7" rectangular filter sock originally but replaced it with a 3D printed 4" filter cup so I could just drop bags of chemipure and use loose filter floss. I switched back to the filter socks as I was afraid maybe the cup wasn't filtering enough.

Dino’s love low nutrients! Keep no3 10.0- 15 and po4 .05-.1 best closer to .1. run that UV it’s better than non.I believe I have a dinoflagellate outbreak in my tank. I have watched what BRS says to do to help with this problem (such as adding copepods, which I added 3 jars last week) , but I am wondering if there may be some more things to correct. After looking through some other threads, I plan to order some sodium silicate to dose into my tank, and I am running a Hygger UV light that is just sitting in the sump by the protein skimmer. It is only a 9-watt light; it is just what I had on hand. I am open to any recommendations on lights I can add to my sump that would not break the bank but would work much better for a 90-gallon tank with a 30-ish gallon sump. Recently, my tank bottomed out on phosphate, and I am wondering if that is what caused this outbreak. However, I want to make sure I am not doing anything else wrong. As of tonight, all of my tests showed the following:
Calcium 420
Phosphates .04
Nitrates 10
Alkalinity 8
Salinity 1.026
PH 8.0
Any help is appreciated! Thanks!
Phosphate was 0.09 today. I just ordered an Amazon uv pump that had 8k reviews so I’m going to try that. I’ll keep everyone updated.Dino’s love low nutrients! Keep no3 10.0- 15 and po4 .05-.1 best closer to .1. run that UV it’s better than non.I believe I have a dinoflagellate outbreak in my tank. I have watched what BRS says to do to help with this problem (such as adding copepods, which I added 3 jars last week) , but I am wondering if there may be some more things to correct. After looking through some other threads, I plan to order some sodium silicate to dose into my tank, and I am running a Hygger UV light that is just sitting in the sump by the protein skimmer. It is only a 9-watt light; it is just what I had on hand. I am open to any recommendations on lights I can add to my sump that would not break the bank but would work much better for a 90-gallon tank with a 30-ish gallon sump. Recently, my tank bottomed out on phosphate, and I am wondering if that is what caused this outbreak. However, I want to make sure I am not doing anything else wrong. As of tonight, all of my tests showed the following:
Calcium 420
Phosphates .04
Nitrates 10
Alkalinity 8
Salinity 1.026
PH 8.0
Any help is appreciated! Thanks!