I've been running an upgraded 14 gallon biocube for about 2 years. I have 2 clownfish and 2 shrimp and have purchased a Nuvu 20 to be their new home. The tank is used and had been broken down after a battle with bryopsis. I am running a vinegar bath in it now. I have been searching the web and found information about battling it in an existing tank, but no information about how clean a tank to reuse it after bryopsis. I will be using new dry rock and new sand. The pump in the tank is an mj1200 and is also running in the bath. I have the intank media baskets soaking also. Is there anything else I need to do? Thank you.
Thanks for the add. Question about Bryopsis.
- Thread starter Saltwaterhopes
- Start date
- Tagged users None
dbl
It Takes Less Energy to be Nice
Excellence Award
Reef Tank 365
Article Contributor
Moderator Emeritus
Reef Squad Emeritus
Hospitality Award
My Tank Thread
I will say welcome although it looks as if you've been a member for a while. I would think running vinegar through it, rinsing it well and letting dry thoroughly would do the trick. But please wait for others to chime in and/or offer other suggestions.
yup there should be no problems if you killed it all.
Welcome to reef2reef!
Did you use the fluconazole treatment?
Welcome to reef2reef!
Did you use the fluconazole treatment?
The vinegar won't do a lot for the bryopsis... on the assumption that your not reusing any rock / sand etc from the bryopsis ridden tank and if it's stood dry for a while then a good clean of all the glass should be enough to get rid. If you are using anything or it's not stood dry for any amount of time (less than a month or so) I'd nuke everything with hydrogen peroxide.
As there's no livestock and the tank still has to cycle, perfect opportunity to get some strong stuff and give everything a 48hr bath... if you can get the 35% H2o2 then I'd go 10/90 with RO. If it's the pharmacy 6% stuff then I'd go about 50/50.
It'll destroy all algae traces and any cyano or other nasties persisting.
Just wear gloves if you're handling string H2o2... it's a potent oxidiser!!
Lol... sorry, missed the bit about using new sand / rock... if it were me I'd still nuke with H2o2.
Thats what you want.
Where are you based? I'm in the UK and we can get up to 9% over the counter at any pharmacy.
Failing that 12% is easy to come by on eBay.
Failing that 12% is easy to come by on eBay.
jsker
Reefing is all about the adventure
Super Moderator
Ultimate Member
Reef Squad
Excellence Award
Reef Tank 365
Article Contributor
Hospitality Award
Ocala Reef Club Member
My Tank Thread
Welcome to R2R. H2O2 is hydrogen peroxide 3% 1 Ml per 10 gallons daily before lights or after
Saltwaterhopes
New Member
- Joined
- May 18, 2016
- Messages
- 8
- Reaction score
- 10
After 2 days in vinegar bath. I spent about 1 1/2 cleaning the tank, media racks, return lines (inside and out) and the pump till all sparkled like new. Tank is now running in a hydrogen peroxide bath with the 3% solution. Going to try a pharmacy for the stronger solution as a pet shop owner told me they used to have it, but the pharmacy was closed at that time. Will add it for a little extra oomph just to be safe.
Last edited:
Saltwaterhopes
New Member
- Joined
- May 18, 2016
- Messages
- 8
- Reaction score
- 10
Based in USA. Good to know about ebay.
More is not always better.
Hmmmm not sure...
more bhp = better car
More sq ft = better house
More gallons = better tank
More money = better life
Lol... only kidding. On a serious note, if you can get food grade h202 then all the better... pharmacy stuff has a stabilising agent, usually an acid, added whereas food grade is in effect h202 diluted in RO. I'd go for lower h202 % without stabiliser rather than a higher % with it.
Hope that makes sense?
Last edited by a moderator:
Similar threads
