The Infamous Vortech Ceramic Shaft Failure?

  • Thread starter Thread starter dangles
  • Start date Start date
  • Tagged users Tagged users None
Take it apart and look at it.

You can now buy the shaft frame without buying a whole new side. Which should have been something offered much sooner. I ended up getting rid of my vortechs because buying a new $$$ wetside every time was unacceptable.
 
Take it apart and look at it.

You can now buy the shaft frame without buying a whole new side. Which should have been something offered much sooner. I ended up getting rid of my vortechs because buying a new $$$ wetside every time was unacceptable.

Ugh what the f $50 with shipping :face-with-tears-of-joy:

That’s half the price of a new wet side, and 1/3 the price of a Jecod!

May be time to go to the dark side and get one of the Chinese knockoffs!
 
Ugh what the f $50 with shipping :face-with-tears-of-joy:

That’s half the price of a new wet side, and 1/3 the price of a Jecod!

May be time to go to the dark side and get one of the Chinese knockoffs!

haha, well it used to be a whole new wet side.... every... time.
 
Take it apart and look at it.

You can now buy the shaft frame without buying a whole new side. Which should have been something offered much sooner. I ended up getting rid of my vortechs because buying a new $$$ wetside every time was unacceptable.
Google it Lots of fixes for them one guy has spare shafts
 
Hopefully with their patent expiring soon they will be forced to innovate. As an example of how much ecotech is ripping people off, they'll sell you a battery back up for $220 that's 18 amp hours. You can buy a 20 amp LiFePO battery for $60, and spend $50 on a charge controller and get more battery for half the price. The battery will also likely have a much longer lifespan.

But just like Red Sea, every store pushes Ecotech.
 
Is your wetside out of warranty? Normally ecotech will take care of you if it's in warranty with 0 issues.
While I haven't seen the jebao wetsides sold on their own, I can confirm that the dmp40 wet side is usable on an mp40 and vice versa(not sure if theres long term issues though) if you can source one for a low price
20241004_133744.jpg
 
Is your wetside out of warranty? Normally ecotech will take care of you if it's in warranty with 0 issues.
While I haven't seen the jebao wetsides sold on their own, I can confirm that the dmp40 wet side is usable on an mp40 and vice versa(not sure if theres long term issues though) if you can source one for a low price
20241004_133744.jpg



Out of warranty for one and the other was used. If I end up needing to replace the wet side I'll definitely consider just going with the Jecods instead!
 
Try goggling Vor Tech Pump noise repair. found numerous links hopefully you find the one I did were he replaced the ceramic shaft
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 8 26.7%
  • Powerheads or wavemakers

    Votes: 3 10.0%
  • Sump or rear filtration chambers

    Votes: 5 16.7%
  • Skimmer or other filtration equipment

    Votes: 1 3.3%
  • Overflow or plumbing

    Votes: 7 23.3%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 5 16.7%
  • Other—tell us what I missed

    Votes: 1 3.3%
Back
Top
Home
Post thread…
Market
What's new