Feet4Fish
Valuable Member
- Joined
- Jan 9, 2015
- Messages
- 2,133
- Reaction score
- 2,689
- Location
- Lynn, Indiana
- What state or country do you live in
- Indiana
I am selling my roller mat. Worked awesome and loved it. The only reason I am getting rid of it is that my new upgraded system would provide to high a flow rate (2800 gph) for the roller mat to handle. You will need to buy a new fleece roll which runs about $20 at BRS. Also of note is that the bulkheads on the roller mat are all metric and I purchased the metric to standard conversion fittings which will be included with the roller mat. The unit works flawlessly. Will ship if needed. I live in Indiana for those who might be interested regionally. The only "problem" with the unit is that I solvent welded a 3/4" PVC pipe to the primary drain bulkhead. I have cut the the pipe down to about 1.5". There are three options that I see to plumb this drain:
1. Simply use a coupler
2. "Melt" the PVC out of the fitting. I have successfully used the method demonstrated by Reefbum on youtube.
3. Take out the metric bulkhead and replace with new standard or metric bulkhead,
I am asking $200 for the roller mat and if shipping is needed I would ask and additional $20. If you have any questions, please ask!
1. Simply use a coupler
2. "Melt" the PVC out of the fitting. I have successfully used the method demonstrated by Reefbum on youtube.
3. Take out the metric bulkhead and replace with new standard or metric bulkhead,
I am asking $200 for the roller mat and if shipping is needed I would ask and additional $20. If you have any questions, please ask!
