I know. I need to learn patience. However, I have kessil 160we and it hard to pin the PAR. I will try to leave the settings for a month and change slow if needed. Scoly is a bit shaded so its not blasted with light.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Its easy. Grab a lux meter. $16 on amazon. divide lux reading by 60. Its easily that your not giving it enough light with that fixture. I believe with that light at full it only delivers 300 or 400 par or so at 12 in. Id bet the coral wants around 100+ or so. same with the scoly Id bet.I know. I need to learn patience. However, I have kessil 160we and it hard to pin the PAR. I will try to leave the settings for a month and change slow if needed. Scoly is a bit shaded so its not blasted with light.
What do you have now? And how high & %'s.Mhm. Good point. May be my problem is not too much light but not enough light. Should I buy a 360we or something else? Its a 20x 20 x 18 rimless cube.
its worth a shot. it doesn't def doesn't sound like much light. Fwiw I think the 160 maxes out(full power) at 300 to 400 par or so at 12in.Kessil 160we. Turns on at 8:00am with 5% intensity and 0 color. Peaks at 12 with 40 intensity and 30 color. Comes down starting at 5 pm to 9 pm.
Think I should increase the intensity?
its worth a shot. it doesn't def doesn't sound like much light. Fwiw I think the 160 maxes out(full power) at 300 to 400 par or so at 12in.
If you increase just do it slowly.
I’m relatively new to the reef aquarium and am having the same problem, exactly like you lost two heads, I’m going to dip for flatworms,Yes it cycled. We've had it lil over 4 months now. We've had the clean up crew for a while & then added two fish to the tank they did great so added a couple more fish & the frag & torch over the weekend