Torch sadness

  • Thread starter Thread starter demasoni
  • Start date Start date
  • Tagged users Tagged users None

demasoni

Community Member
View Badges
Joined
Jan 14, 2026
Messages
29
Reaction score
57
Location
Spring Lake
What state or country do you live in
Michigan
Rating - 0%
0   0   0
Why are my torches receding and not looking happy? I've worked at getting magnesium up to ~1400 and all my other measurements are in line (ammonia, nitrates, nitrites, phosphates)

PXL_20260307_224755254.jpg PXL_20260307_224803304.jpg PXL_20260307_225506592.jpg
 
Last edited:
My zoas and gsp seem happy. I'm.just disappointed that the softies are not thriving
 
Why are my torches receding and not looking happy? I've worked at getting magnesium up to ~1400 and all my other measurements are in line (ammonia, nitrates, nitrites, phosphates)

PXL_20260307_224755254.jpg PXL_20260307_224803304.jpg

Could be a lot of different reasons: flow, pests, light, subjective nature of "in line" parameters, any fast changes in parameters.
I appreciate that...but.it.seems.that there is something I'm missing
 
Torch corals are notoriously picky and the most common missing piece when people say "parameters are in line" is actually alkalinity and calcium - two of the most critical values for LPS like torches. Can you share your exact alk (dKH) and Ca readings? Those are often the culprits when softies like zoas/GSP are fine but LPS are struggling.

A few things worth investigating:

1. Alkalinity swings - even small daily swings in alk (1-2 dKH) can cause torches to retract and recession. They are far more sensitive to this than softies. Ideally you want alk stable at 8-9 dKH.

2. Flow - torches prefer low to moderate, indirect flow. If they're getting hit by a powerhead directly they will stay retracted. Try reducing flow or repositioning them so current is gentle and indirect.

3. Pests - this is a big one that's easy to miss. Check carefully at night with a flashlight for Aeolid nudibranchs (tiny white/translucent slug-like creatures) or sundial snails near the base. These are specific torch/euphyllia predators and very hard to spot during the day.

4. Allelopathy - are the torches near any other corals? Leathers, toadstools, or even other euphyllia species touching them can cause stress. Torches need some space.

5. Lighting - what light are you running and at what intensity? Torches do well under moderate PAR (~75-150). Too much light can cause them to keep their tentacles retracted.

The fact that your Mg is at 1400 is actually a bit on the high side of the normal range (1200-1350). It won't cause direct harm but it's worth noting as you're adjusting chemistry.

Could you share more specifics on your tank - size, age, and which corals are nearby the torches?
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 46 56.1%
  • Automated dosing

    Votes: 6 7.3%
  • Mechanical filtration / roller filter

    Votes: 4 4.9%
  • Automated water testing

    Votes: 3 3.7%
  • Automatic feeding

    Votes: 1 1.2%
  • Lighting schedule

    Votes: 15 18.3%
  • Controller and remote monitoring

    Votes: 3 3.7%
  • Leak detection and emergency shutoff

    Votes: 1 1.2%
  • Automatic water changes

    Votes: 2 2.4%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.2%
Back
Top
Home
Post thread…
Market
What's new