Trident controlled Dosing

[dwfain]

I am dosing Alk and have told the Neptune Dos to let the Trident control the dosing. I have the parameters set for 8 + or - .5. My question is, if I go into the advanced properties of the Alk Dos and set the following lines will this affect the Trident controlled dosing.

Fallback ON
Set ON
If Alkx3 > 8.50 Then OFF

Basically I want the Trident to control the dosing but if it gets above 8.5 I do not want to dose.

 

[blaxsun]

I think that should work - but I've honestly never tried it on mine. I'd give the Trident ±50% range with the dosing such that as it gets closer to 8.5dKH it will dose less and less.

 

[dwfain]

I think that should work - but I've honestly never tried it on mine. I'd give the Trident ±50% range with the dosing such that as it gets closer to 8.5dKH it will dose less and less.

I am dosing Alk and have told the Neptune Dos to let the Trident control the dosing. I have the parameters set for 8 + or - .5. My question is, if I go into the advanced properties of the Alk Dos and set the following lines will this affect the Trident controlled dosing.

Fallback ON
Set ON
If Alkx3 > 8.50 Then OFF

Basically I want the Trident to control the dosing but if it gets above 8.5 I do not want to dose.

Update on this. Actually this turned into a disaster. The above statements kicked on the pump and dumped 1L of Alk into the tank. I've spent the last 2 days doing 20% water changes every 4 hours to get the level back down, it went up to 20+. I was told on a Neptune forum to never use a set command in the advanced when the controlled dosing is on. The only command I should have used was the If command.

 

[blaxsun]

Update on this. Actually this turned into a disaster. The above statements kicked on the pump and dumped 1L of Alk into the tank. I've spent the last 2 days doing 20% water changes every 4 hours to get the level back down, it went up to 20+. I was told on a Neptune forum to never use a set command in the advanced when the controlled dosing is on. The only command I should have used was the If command.

Yikes! Well, good to know for future reference. How's everything in the tank doing?

 

[MMI]

Yeah you don't need the set on command. This is how I have mine set and it works perfectly.