Triton ICP - tin?

Reefin' Alaska

Active Member
View Badges
Joined
Sep 14, 2020
Messages
303
Reaction score
134
Location
Anchorage
What state or country do you live in
Alaska
Rating - 100%
1   0   0
Everything else was pretty spot on, except some elements they suggested dosing for, that were still in the green, but close to borderline.

But Silicon which I believe came from my biomedia, because I haven't done any water changes. (I do Triton)

Tin, I've removed all magnets. Checked all MP40's, stripped down the return pump and cleaned, no rust or anything. Not sure what else would cause this? ICP test came back with a reading of 46.. I think that's a lot?
 
Tin is complicated since there are lots of chemical forms of varying toxicity, but if the tank is not suffering, I wouldn’t agonize over it. Many folks have that sort of level without apparent issue and those that seemingly do have issues usually have substantially higher levels.

Plastic pipe and tubing can be a substantial source of tin which is added as a stabilizer of the plastic.
 

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 62 57.9%
  • Automated dosing

    Votes: 6 5.6%
  • Mechanical filtration / roller filter

    Votes: 4 3.7%
  • Automated water testing

    Votes: 3 2.8%
  • Automatic feeding

    Votes: 1 0.9%
  • Lighting schedule

    Votes: 21 19.6%
  • Controller and remote monitoring

    Votes: 4 3.7%
  • Leak detection and emergency shutoff

    Votes: 2 1.9%
  • Automatic water changes

    Votes: 3 2.8%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 0.9%
Back
Top
Home
Post thread…
Market
What's new