Trouble getting LTA to attach

  • Thread starter Thread starter Wg6
  • Start date Start date
  • Tagged users Tagged users None

Wg6

New Member
View Badges
Joined
Aug 20, 2019
Messages
10
Reaction score
3
What state or country do you live in
Texas
Rating - 0%
0   0   0
Hi all,

I picked up this LTA yesterday and I’m having trouble getting it to attach to anything. I’m currently trying to get it to stick to this wall so that it can dig itself down into the sand bed, but I haven’t had any success.. I also tried digging a little hole to get it closer to the floor of the glass
but it just ends up slowly floating out of it.

It’s in a pretty low flow area and seems to be fairly happy otherwise.


Do I need to have it closer to an actual rock to stick to, or is there some way I can get it to use the wall as a base? Should I just be more patient?


20261116_130708_234DA630-2FD8-4556-8526-6D8F20084386.png



Thanks.
 
Nems are temperamental, they'll attach if they're inclined to do so and forcing the issue is a recipe for disaster most of the time.

Best you can do is stick it in a rocky area and sort of box it in with some temporarily placed rocks. I would also lower flow or turn off your power heads for a few hours. Eventually it should grab on to something and you can turn the flow back up and rearrange your rocks back to your liking.

Just don't expect it to stay where you want it to and don't try to remove it from a rock to move it back. Eventually it should find a spot it likes, but like I said they're temperamental and will move whenever and wherever they please.
 
Nems are temperamental, they'll attach if they're inclined to do so and forcing the issue is a recipe for disaster most of the time.

Best you can do is stick it in a rocky area and sort of box it in with some temporarily placed rocks. I would also lower flow or turn off your power heads for a few hours. Eventually it should grab on to something and you can turn the flow back up and rearrange your rocks back to your liking.

Just don't expect it to stay where you want it to and don't try to remove it from a rock to move it back. Eventually it should find a spot it likes, but like I said they're temperamental and will move whenever and wherever they please.
Thanks, that’s what I figured. So should I just leave it be until it decides to stick here or ends up moving on to a better place?

My plan was to just turn my wave maker off at night so it doesn’t get caught up while I’m not checking in. But I did find it in a corner with very little light so I gently nudged it over to where it is now and it hasn’t moved for the last 6 ish hours.
 
Thanks, that’s what I figured. So should I just leave it be until it decides to stick here or ends up moving on to a better place?

My plan was to just turn my wave maker off at night so it doesn’t get caught up while I’m not checking in. But I did find it in a corner with very little light so I gently nudged it over to where it is now and it hasn’t moved for the last 6 ish hours.

I'd turn the power head off during the day too until it attaches. At least for a few hours. When the flow is turned back on it will probably start "walking" until it finds a spot it likes.

When I got my first RBTA, I put it in a rock crevice near the spot I thought it would like and turned off the power head for around 6 hours. It attached and opened up a bit and when I turned the flow back on it moved out of the flow a bit. A few days later it migrated to the top of the rock I put it on into the middle of some of my SPS corals. There it remained for a good while and happily stung everything around it haha Then one day I moved the power head over a bit and the nem decided to go back to where I generally wanted it to be. The next day it decided to go into a hole in the rock and stretch out the back where I couldn't see it. They're nuts and will definitely keep you on your toes.

I know LTAs are fairly different from RBTA and might not move as much, but they're still gonna do whatever they want to do.

If you're worried about it getting into your power head I would look into getting a new guard of some sort. That will hopefully keep them from getting shredded if they end up near the power head.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 33.3%
  • I decorate AROUND the tank or stand

    Votes: 1 33.3%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 1 33.3%
  • We don’t decorate for the holidays

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new