I recently took my milwaukee controller off line and hooked my apex up to my Calcium reactor. Now that I have graphing I'm seeing that my Ph is all over the board with some significant drop outs without any real reason.
Regardless of the bubble count, or the programming the Ph jumps and is inconsistant. I currently have the BPM set at 50, the drip is all the way open due to huge demands and the outlet has been manually on since 7 this morning. I checked the pump input last night and it was plugged with some media which I hoped was the problem. I use coarse media, some DIY recycle and brightwells Neo Mag in the reactor.
Here is the graph from today
Any Ideas.
Regardless of the bubble count, or the programming the Ph jumps and is inconsistant. I currently have the BPM set at 50, the drip is all the way open due to huge demands and the outlet has been manually on since 7 this morning. I checked the pump input last night and it was plugged with some media which I hoped was the problem. I use coarse media, some DIY recycle and brightwells Neo Mag in the reactor.
Here is the graph from today
Any Ideas.
