- Joined
- Oct 18, 2019
- Messages
- 523
- Reaction score
- 402
I had to send my Profilux 4 unit back for GHL to check out why the buttons don't work but I would like to continue with the setup. I've searched for these answers but it's tough to find exact examples for each situation. With how the fish area is setup in my basement, the runs from Profilux to sump are going to be extensive and I need help either figuring out what I need to suit my game plan or any ideas to make it better. The cabinet (eventually contain Profilux, KHD/Doser, ION/Doser, fluid containers) has to be located away from the sump as seen in my high quality Excel picture below.
Situation 1 - The dosing line from the KHD & ION will have a roughly 18' (12' lateral + 6' vertical) run to the dosing area within my sump. I can buy long lengths of silicone tubing but will the dosers test/dose consistently at that length?
Situation 2 - The probes coming from the Profilux to the probe area is a roughly 22' (16' lateral + 6' vertical) run. I would have to do one of three things: Buy a 25' BNC cable from a non-GHL vendor, buy a 3M & 5M for each probe from GHL, spend $340 on an expansion box. Will the probes be consistency with cables at that length with some tweaking of settings?
Side note, moving the top-off/saltwater station isn't feasible. Any ideas from the R2R family would be greatly appreciated. Thanks!
Situation 1 - The dosing line from the KHD & ION will have a roughly 18' (12' lateral + 6' vertical) run to the dosing area within my sump. I can buy long lengths of silicone tubing but will the dosers test/dose consistently at that length?
Situation 2 - The probes coming from the Profilux to the probe area is a roughly 22' (16' lateral + 6' vertical) run. I would have to do one of three things: Buy a 25' BNC cable from a non-GHL vendor, buy a 3M & 5M for each probe from GHL, spend $340 on an expansion box. Will the probes be consistency with cables at that length with some tweaking of settings?
Side note, moving the top-off/saltwater station isn't feasible. Any ideas from the R2R family would be greatly appreciated. Thanks!