- Joined
- Jan 25, 2019
- Messages
- 69
- Reaction score
- 47
- Location
- Tampa FL
- What state or country do you live in
- Florida
So I want to upgrade my sump area. Currently it is not under my tank as my (65g) tank is on a (very sturdy) non regular piece of furniture. I have a sideboard/buffet/standalone cabinet system next to it and I am actually looking to get a new real solid wood one that is nice that I can plumb rigidly and add some extra equipment to (xmas is coming!). Currently I have a trigger 26 sump and an ATO and I just drop the ato pump into one of those 5 gallon jugs when I make a new one of fresh water. I want to add another tank/sump/water container that is about 20 gallons upstream from my sump. I want it for more water volume for stability, and also I want to add a Clarisea roller to my system and dont have the room at the moment. I figured I might as well design it to help with water changes too, so below is my quick drawing of how I want things set up, and to the right is a close-up of the water change plumbing. Basically, its a small return pump with 2 3-way valves in the plumbing so I can drain water out of that 20 gallon tank into a bucket, then flip the valves, swap the bucket and fill that 20 gallon tank back up with new salt water from a bucket. The 20g tank will be drilled and have an overflow going to the (lower) input of the sump, and also be drilled for a long "straw" of pvc going to almost the bottom of the 20g tank leading to the small water change pump so I can get as much of that water out as possible during the change. The bucket side of the WC system will have a swing out pvc pot filler type arm with a length of vinyl hose at the end to reach the bucket on the floor.
All that sound ok and reasonable? Hopefully yes, and I am open to creative criticism, so help me make my system robust and smart.
Now I just need to find the right size/shape sideboard server cabinets to fit everything and be made of solid real wood with a real wood back so I can put screws into it to hold pipe etc. Any help on where to look for that? The cabinet I have now sucks and I hate it, and the better it looks, the less heat I'll take from my wife about all the upgrades on the inside :)
Thanks everyone.
All that sound ok and reasonable? Hopefully yes, and I am open to creative criticism, so help me make my system robust and smart.
Now I just need to find the right size/shape sideboard server cabinets to fit everything and be made of solid real wood with a real wood back so I can put screws into it to hold pipe etc. Any help on where to look for that? The cabinet I have now sucks and I hate it, and the better it looks, the less heat I'll take from my wife about all the upgrades on the inside :)
Thanks everyone.