URGENT need help vectra pump not working

[Bugger]

I checked this morning and it was flashing red and green.
I don't know how to reset it like a regular mp 60 /40
Has anybody experianced this the pump is dead and flashing red or green
or green and yellow

 

[jsker]

This what I found for you
link
link
looks like you need to contact customer support. You can always try the unplug and let the unit stand for 5 minutes and plug back in method.

 

[redfishbluefish]

I'd begin by unplugging it, pulling it out, and taking it apart to thoroughly clean it. Reassemble and see where you're at.

 

[Bugger]

The impeller is covered in some kind of calcium deposits I hope this is all it is thanks guys

 

[redfishbluefish]

The impeller is covered in some kind of calcium deposits I hope this is all it is thanks guys

@jsker and I will send you the bill. :eek: Luck for you it didn't require a house call. :rolleyes::D

 

[jaws789832]

Mine was doing that and it turned out to be the power supply. At first I could get it to work but it would only work for a little while . It was at start up. The power supply didn't have enough juice to get it going. Once it was going it was fine. Finally I couldn't get it to start at all so I ordered a new power supply and it has worked ever since. I actually ordered 2 power supplies so now I have a backup. My power supply (the old and the new one) gets pretty hot so I think it just fries itself.

 

[jsker]

I just found a job application for tech support:p:p:D
Nice work

 

[jsker]

Mine was doing that and it turned out to be the power supply. At first I could get it to work but it would only work for a little while . It was at start up. The power supply didn't have enough juice to get it going. Once it was going it was fine. Finally I couldn't get it to start at all so I ordered a new power supply and it has worked ever since. I actually ordered 2 power supplies so now I have a backup. My power supply (the old and the new one) gets pretty hot so I think it just fries itself.

Good to know.

 

[Bugger]

Is the impeller aspose to turn because mine seems fused.
When I took it apart the thing does not spin

 

[XocyrusX]

Is the impeller aspose to turn because mine seems fused.
When I took it apart the thing does not spin

I had the same thing happen. I soaked mine and still the same thing. Had to send it to them and they sent me one. Sorry for the news but the truth.

 

[redfishbluefish]

My gosh, that looks just like the Waveline pump I have, but has the white body and blue fittings.....VIDEO.

Yes, holding the black portion, the yellow impeller and magnet should rotate.

Soak it in vinegar overnight.