Varios 4 question

medskie

Community Member
View Badges
Joined
Nov 7, 2019
Messages
26
Reaction score
7
Rating - 0%
0   0   0
I need some confirmation on what this pump can handle. I am currently ordering plumbing for my new tank which is a SCA 75 (36x24x20” 12mm rimless) gallon using an herbie overflow. I am adding a manifold for a BRS dual reactor(carbon/gfo) and a second connection for any future equipment(maybe a calcium reactor) I want to use. Will the Varios 4 be able to handle this or should I consider going for the Varios 6? I'm fairly confident it would be enough flow for the dual reactor but I just want to get some insight from other reefers using this pump in their sumps.

Any tips for plumbing the return manifold if you have them! I will be using unions for most of the connections so I can adjust my plans if needed.

Thanks!
 

GoVols

Cobb / Webb - 1989
View Badges
Joined
Nov 29, 2016
Messages
13,078
Reaction score
37,560
Location
In-The-Boro, TN
Rating - 0%
0   0   0
FWIW:

Don't run your cal reactor off the main return pump and or your manifold, the effluent rate won't stay stable doing that.

Been running the Sicce .5 (Tunze Silence) as my cal reactor's feed for way over 1.5 years, with the GEO needle valve and it has worked flawless. Put the needle valve on after the second stage.


Streaming the effluent at about 280ml per min.

Good luck on choosing your Varios
 
OP
OP
medskie

medskie

Community Member
View Badges
Joined
Nov 7, 2019
Messages
26
Reaction score
7
Rating - 0%
0   0   0
Thanks for the info! This will be my first time using a calcium reactor and after a bit more research your tip makes perfect sense. Appreciate it!
 

SCReef'n

Valuable Member
View Badges
Joined
Dec 27, 2018
Messages
1,309
Reaction score
6,067
Location
Waponi Woo
Rating - 0%
0   0   0
My various 4 runs my 60 cube return and manifold with a media reactor. It does this easily at around half speed. I don’t run a lot of flow through my sump but it’s got two more gears if I feel like adding equipment or upping the flow. For what’s its worth
 
OP
OP
medskie

medskie

Community Member
View Badges
Joined
Nov 7, 2019
Messages
26
Reaction score
7
Rating - 0%
0   0   0
My various 4 runs my 60 cube return and manifold with a media reactor. It does this easily at around half speed. I don’t run a lot of flow through my sump but it’s got two more gears if I feel like adding equipment or upping the flow. For what’s its worth
My setup isn't much larger than yours so I figure the flow should be more than adequate. Thanks for the reply. Cheers!
 

Form or function: Do you consider your rock work to be art or the platform for your coral?

  • Primarily art focused.

    Votes: 20 7.8%
  • Primarily a platform for coral.

    Votes: 45 17.5%
  • A bit of each - both art and a platform.

    Votes: 174 67.7%
  • Neither.

    Votes: 12 4.7%
  • Other.

    Votes: 6 2.3%
Back
Top