Water Leakage on Sump PVC Pipe

velidhamamci

New Member
View Badges
Joined
Feb 9, 2026
Messages
3
Reaction score
2
Location
Istanbul
What state or country do you live in
Other International
Rating - 0%
0   0   0
Hi everyone,

I set up a reef tank yesterday and I have 2 PVC drain pipes and 1 PVC return pipe in the sump below. The return pipe is leaking about one drop per hour from the elbow where it connects to the aquarium. The leaking water falls back into the sump that there is no harm for now. Will this leak increase over time? Is it a serious problem? Since the PVC connections are glued with Tangit, dismantling and redoing them is very difficult. Do I need to cut the existing pipe and buy a new elbow?

Thanks.


Untitled.jpg
 
Clean pipework very nice. I even like the black & white pvc color scheme.

There is no harm from the drip and most likely it will cure itself with mineral deposits/salt scale.

Show us the display tank. Tell us what your vision is for your system. Consider starting a tank journal in members tank forum.

I see this is your first post. Welcome to r2r community. Briefly introduce yourself on meet & greet forum. Also discribe your experience level. If you are a newbie, embrace it and learn.
Let the good times roll.
 
Upvote 0
I would maybe give a week to see if it cures itself, but then after a week, yeah I would cut it out. I'm sure many will say since it's over the sump you could leave it. But just my opinion, I wouldn't leave it.
Fortunately you have enough of the straight pipe above the 90 to glue to.
 
Upvote 0
Clean pipework very nice. I even like the black & white pvc color scheme.

There is no harm from the drip and most likely it will cure itself with mineral deposits/salt scale.

Show us the display tank. Tell us what your vision is for your system. Consider starting a tank journal in members tank forum.

I see this is your first post. Welcome to r2r community. Briefly introduce yourself on meet & greet forum. Also discribe your experience level. If you are a newbie, embrace it and learn.
Let the good times roll.
Thanks for your reply.

Okay then i will not intervene. I got really happy :) Hope, everything happen as you said.

I will be uploading display tank photo. The tank will have LPS and SPS corals. I will share all details. Thank you again for your interest.
 
Upvote 0
I would maybe give a week to see if it cures itself, but then after a week, yeah I would cut it out. I'm sure many will say since it's over the sump you could leave it. But just my opinion, I wouldn't leave it.
Fortunately you have enough of the straight pipe above the 90 to glue to.
Thanks for your reply.

I will give a week to the result that if leakage increases, i will be cutting it, and redo.
 
Upvote 0
Thanks for your reply.

I will give a week to the result that if leakage increases, i will be cutting it, and redo.
What I might be tempted to do is put a union above the 90 instead of a coupling.
 
Upvote 0
What I might be tempted to do is put a union above the 90 instead of a coupling.
If you are going to the trouble of redoing plumbing, then add union for any future maintenance or piping upgrades.
 
Upvote 0
If you are going to the trouble of redoing plumbing, then add union for any future maintenance or piping upgrades.
My thought was if any future pump work is done ( cleaning, swapping out) if you can remove the whole pipe you eliminate the risk of doing any damage to the bottom of the tank where the return line goes into it.
 
Upvote 0
After reviewing piping in sump, I see two unions with clear pvc showing a check valve in return line to tank.

I have a problem with the use of check valves in marine systems because of biofowling. For 30 years, I worked as a mechanic & subsea engineer on drilling ships & semi-submersibles in deep water drilling.

OP,
I suggest you use a syphon breaker on your return line to tank. If pump fails, the check valve is not a durable insurance policy for overflowing sump.
 
Upvote 0

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 18 18.6%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.3%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.5%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.4%
  • I keep a backup of everything

    Votes: 25 25.8%
  • Other (Post in the comments)

    Votes: 7 7.2%
Back
Top
Home
Post thread…
Market
What's new