Waterbox 20 aio cube help....

[Frostjoker]

Hello everyone,

So I got a really good deal on a waterbox 20 with a stand and light, unfortunately it didn't include a pump or filter socks, planning on removing the filter sock area and going with a media basket from intank or is there a better suggestion on that? My main question is I picked up a sicce silent 1.0 for it got it all hooked up filled the tank with water got it running, but every now and then it pulls a little vortex from the surface and it shoots like micro bubbles all over the tank, I don't know if the water level is too low or if the pump is to powerful for the tank. Any suggestion on that to do about that. Am getting ready to do a new tank tread but I kinda want to get this issue taken cure of before I do. I attached a few photos of water level and the nozzle position i have right now.

Thanks in advance.

 

[Tahoe61]

Change the nozzle or direction of the nozzle. Point the flow direction more downward.

 

[FishRN]

I use the same pump on the same tank I got a random flow nozzle for mine. I have it pointed towards the surface zero micro bubbles

 

[Sdbuehler1]

I use the same pump on the same tank I got a random flow nozzle for mine. I have it pointed towards the surface zero micro bubbles

I put a random flow nozzle on mine as well. It’s longer so you can bend it down further and eliminate the vortex.

 

[Frostjoker]

Thanks guys, read up on the random flow nozzle. And went ahead and ordered it. Thanks for the suggestion