- Joined
- Oct 27, 2021
- Messages
- 64
- Reaction score
- 44
- Location
- NH
- What state or country do you live in
- New Hampshire
Second hand owner. The leveling feet, the female threads inside the base are rusted and stripped. They do not hold when you adjust the screws.
Floor over the course of 6’ has a 3/8” slope.
I’ve been using ChatGPT to figure out best plan and it seems some people have used 3/4” plywood as a base that they level out with shims.
Anyone done this one such a large tank?
I started it, however makes me nervous.
Tonight I was tossing the idea of just building a DIY stand. I have the sump in my basement, do I do not have to worry about a sump in the stand.
See where I’m at with the shims, and using the base to level.
I’m looking for suggestions. Best route to go.
-
Anyone built a custom stand for a large waterbox ?
Floor over the course of 6’ has a 3/8” slope.
I’ve been using ChatGPT to figure out best plan and it seems some people have used 3/4” plywood as a base that they level out with shims.
Anyone done this one such a large tank?
I started it, however makes me nervous.
Tonight I was tossing the idea of just building a DIY stand. I have the sump in my basement, do I do not have to worry about a sump in the stand.
See where I’m at with the shims, and using the base to level.
I’m looking for suggestions. Best route to go.
-
Anyone built a custom stand for a large waterbox ?