Eddie909
Community Member
I have a quick inquiry regarding the Infinia 190 return hose I plan to utilize with my Ecotech Vectra L2. Are there any additional plumbing components I need to order? I do not intend to hard plumb at this time.
Waterbox Infinia 190 return hose
- Build Thread
- Thread starter Eddie909
- Start date
- Tagged users None
cdemoss01
5000 Club Member
- Return hose barb fitting size: Red Sea typically uses 25mm (approximately 1 inch) barbed return fittings on their Infinia series tanks.
- Included with Infinia: Red Sea usually provides a flexible return hose and a barb fitting for the return bulkhead.
However, compatibility with your pump outlet is where you need to double-check.
- The Vectra L2 outlet is 1.25 inches (32mm) and includes barbed adapters and unions in its accessories.
What You Might Need:
1. Hose Adapter or Reducer
To connect the 1.25" Vectra L2 outlet to the 25mm (1") Infinia hose/barb, you’ll need one of the following:
- Step-down barbed adapter (1.25" to 1")
- Flexible reducer coupler (like a silicone or PVC coupler with clamps)
2. Hose Clamps
Essential for securing the hose to both barbs:
- Stainless steel (marine grade) or plastic clamps
- Size depends on hose diameter, usually 1" clamps for the Infinia side and 1.25" clamps for the Vectra side
3. Flexible Return Hose (if not using the Infinia-provided one)
- Reinforced braided vinyl tubing or silicone tubing
- Match the internal diameter (ID) of the fittings
Optional Components (Nice to Have):
- Ball valve or gate valve (for manual flow control, though the Vectra M2/L2 is controllable via Mobius)
- Check valve (if you want to prevent back-siphoning during power loss, though this is debated in reefing)
- Union fitting for easier removal of the pump
Summary:
You’ll likely need:
- A 1.25” to 1” reducer (barb or flexible)
- Hose clamps (2–4)
- Possibly extra 1” flexible tubing if you want to customize length
Eddie909
Community Member
- Return hose barb fitting size: Red Sea typically uses 25mm (approximately 1 inch) barbed return fittings on their Infinia series tanks.
- Included with Infinia: Red Sea usually provides a flexible return hose and a barb fitting for the return bulkhead.
However, compatibility with your pump outlet is where you need to double-check.
- The Vectra L2 outlet is 1.25 inches (32mm) and includes barbed adapters and unions in its accessories.
1. Hose Adapter or Reducer
To connect the 1.25" Vectra L2 outlet to the 25mm (1") Infinia hose/barb, you’ll need one of the following:
- Step-down barbed adapter (1.25" to 1")
- Flexible reducer coupler (like a silicone or PVC coupler with clamps)
2. Hose Clamps
Essential for securing the hose to both barbs:
- Stainless steel (marine grade) or plastic clamps
- Size depends on hose diameter, usually 1" clamps for the Infinia side and 1.25" clamps for the Vectra side
3. Flexible Return Hose (if not using the Infinia-provided one)
- Reinforced braided vinyl tubing or silicone tubing
- Match the internal diameter (ID) of the fittings
- Ball valve or gate valve (for manual flow control, though the Vectra M2/L2 is controllable via Mobius)
- Check valve (if you want to prevent back-siphoning during power loss, though this is debated in reefing)
- Union fitting for easier removal of the pump
Summary:
You’ll likely need:
- A 1.25” to 1” reducer (barb or flexible)
- Hose clamps (2–4)
- Possibly extra 1” flexible tubing if you want to customize length
Similar threads
- Price: $4,200
- Shipping NOT Available
