Waterbox reef pro setup question

  • Thread starter Thread starter Bryan68
  • Start date Start date
  • Tagged users Tagged users None

Bryan68

Well-Known Member
View Badges
Joined
May 1, 2018
Messages
554
Reaction score
1,182
Location
Fernandina Beach
What state or country do you live in
Florida
Rating - 0%
0   0   0
I've setup a 180.5 and I can't get the sump quiet. The water spilling out of the religion through the top slots, about 13 inch water level. Spills into skimmer chamber, I have that set to the height of the spill over to the pump chamber. So the difference is about 5 inches, causing a loud waterfall. Should I raise the water level in the skimmer area? Seems like the proper level is where I have it. Open to suggestions. Thanks in advance.
 
My WB 170 did the same thing when I set it up in March. I purchased this sponge at my LFS and placed it on the skimmer side to silence the waterfall. Works great, absolutely silent now.
8AA1B884-D05F-481D-88BF-87AFB65274A1.jpeg
 
Oh I just set it at the waterline and pulled the skimmer towards the front to hold the sponge in place.
 
I have this very problem on my Waterbox 170. After running this system for 7 months, I purchased a pipe cleaner. By cleaning the slots between the refugium and the skimmer chamber thoroughly, I was able to help this noise pretty well. Since the slots are a bit rough in their cut, they actually collect algae more quickly. I learned that the BRS160 had their sump custom built and the slots were laser cut to help avoid this problem.

I also use the pipe cleaner on the overflow and that keeps the water level in the aquarium from getting too high.
 
I have this very problem on my Waterbox 170. After running this system for 7 months, I purchased a pipe cleaner. By cleaning the slots between the refugium and the skimmer chamber thoroughly, I was able to help this noise pretty well. Since the slots are a bit rough in their cut, they actually collect algae more quickly. I learned that the BRS160 had their sump custom built and the slots were laser cut to help avoid this problem.

I also use the pipe cleaner on the overflow and that keeps the water level in the aquarium from getting too high.
Good idea, thanks for the info!
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new