Hi guys, go easy on me, this is my first post and apologies in advance as I am sure this is a topic thats been raised a thousand times before...just point me in the right direction if so :)
Anyway...so ive rescaped my reef recently (750l system (6x2x2 display and 4ft sump)) and incorperated some coves and caves in the form of 3 islands. During the rescape I began to thik about flow and to start with updatedmy return pump from an eheim compact 5000+ to a DC controlled 12000. Unhappy with some debris and deadspots in my tank I also added a Jebao CP-25 to the existing pair of RW15's, as thought i now have a lot of flow, too much perhaps?
I'm looking for advice on placement of the wave makers/pumps and again any help or guides with the settings i should be looking to use (ps the RW15's are controlled via the Coral Box AquaLink so are fully programable)
Attached below is a diagram of my tank/aquasacpe...the RW15's are placed on above one another with a gap of 10"
Any halp would be greatly appreciated
Best
B
Anyway...so ive rescaped my reef recently (750l system (6x2x2 display and 4ft sump)) and incorperated some coves and caves in the form of 3 islands. During the rescape I began to thik about flow and to start with updatedmy return pump from an eheim compact 5000+ to a DC controlled 12000. Unhappy with some debris and deadspots in my tank I also added a Jebao CP-25 to the existing pair of RW15's, as thought i now have a lot of flow, too much perhaps?
I'm looking for advice on placement of the wave makers/pumps and again any help or guides with the settings i should be looking to use (ps the RW15's are controlled via the Coral Box AquaLink so are fully programable)
Attached below is a diagram of my tank/aquasacpe...the RW15's are placed on above one another with a gap of 10"
Any halp would be greatly appreciated
Best
B