Web interface on wrong address

Devin_Tesla

New Member
View Badges
Joined
Sep 25, 2020
Messages
20
Reaction score
16
Location
Canada
Rating - 0%
0   0   0
@Ranjib
Hi I powered down the reefpi for some electrical work on my house ssh in and requested a shutdown no problems
on reboot I can ssh in but the web interface is not loading

I have narrowed it down to the fallowing to it's binding on the wrong address 10.4.0.1 not 10.4.0.3
running reefpi 4.0 or 4.1

This is where I need help the IP on the reefpi is 10.4.0.3 and I can ssh in on that address
I'm not having any luck setting it to the right address as I'm not sure how to out side the web interface I can't load.



***@raspberrypi:~ $ sudo systemctl status reef-pi.service
● reef-pi.service - raspberry pi based reef tank controller
Loaded: loaded (/lib/systemd/system/reef-pi.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2021-07-04 08:59:44 EDT; 25s ago
Main PID: 335 (reef-pi)
Tasks: 9 (limit: 2063)
CGroup: /system.slice/reef-pi.service
└─335 /usr/bin/reef-pi daemon -config /etc/reef-pi/config.yaml

Jul 04 08:59:45 raspberrypi reef-pi[335]: 2021/07/04 08:59:45 Successfully started subsystem: system
Jul 04 08:59:45 raspberrypi reef-pi[335]: 2021/07/04 08:59:45 INFO: equipment subsystem: Finished syncing all equipment
Jul 04 08:59:45 raspberrypi reef-pi[335]: 2021/07/04 08:59:45 Successfully started subsystem: equipment
Jul 04 08:59:45 raspberrypi reef-pi[335]: 2021/07/04 08:59:45 Successfully started subsystem: temperature
Jul 04 08:59:45 raspberrypi reef-pi[335]: 2021/07/04 08:59:45 reef-pi is up and running
Jul 04 08:59:45 raspberrypi reef-pi[335]: 2021/07/04 08:59:45 Starting http server at: 10.4.0.1:80
Jul 04 08:59:45 raspberrypi reef-pi[335]: 2021/07/04 08:59:45 ERROR: Failed to run http server. Error: listen tcp 10.4.0.1:80: bind: cannot


***@raspberrypi:/ $ sudo netstat -tulnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 562/sshd
tcp 0 0 127.0.0.1:6010 0.0.0.0:* LISTEN 566/sshd: pi@pts/0
tcp6 0 0 :::22 :::* LISTEN 562/sshd
tcp6 0 0 ::1:6010 :::* LISTEN 566/sshd: pi@pts/0
udp 0 0 0.0.0.0:68 0.0.0.0:* 556/dhcpcd
udp 0 0 0.0.0.0:36520 0.0.0.0:* 329/avahi-daemon: r
udp 0 0 0.0.0.0:5353 0.0.0.0:* 329/avahi-daemon: r
udp6 0 0 :::41013 :::* 329/avahi-daemon: r
udp6 0 0 :::5353 :::* 329/avahi-daemon: r
 

paparoof

Active Member
View Badges
Joined
May 19, 2019
Messages
146
Reaction score
173
Location
Minneapolis
Rating - 0%
0   0   0
I'm not a reef-pi guy, but my guess would be to look in /etc/reef-pi/config.yaml for a place to set it.
 
OP
OP
D

Devin_Tesla

New Member
View Badges
Joined
Sep 25, 2020
Messages
20
Reaction score
16
Location
Canada
Rating - 0%
0   0   0
that is what I figured but all that is there is

---
database: /var/lib/reef-pi/reef-pi.db
 

paparoof

Active Member
View Badges
Joined
May 19, 2019
Messages
146
Reaction score
173
Location
Minneapolis
Rating - 0%
0   0   0
can you set the pi to 10.4.0.1 so that the reef-pi server can bind to that address, just long enough go in, make the change you wanna make?
 
OP
OP
D

Devin_Tesla

New Member
View Badges
Joined
Sep 25, 2020
Messages
20
Reaction score
16
Location
Canada
Rating - 0%
0   0   0
I cat try it will have to pull it of the network as the inter vlan router is at 10.4.0.1
 

TOP 10 Trending Threads

HOW DO YOU ADJUST YOUR CUC AS ALGAE DISAPPEARS?

  • Capture and re-home CUC

    Votes: 3 6.3%
  • Increase white light/hours in tank to spur algae growth to feed CUC

    Votes: 4 8.3%
  • Feed nori to support CUC

    Votes: 19 39.6%
  • Feed herbivore pellets to support CUC

    Votes: 14 29.2%
  • Allow attrition to balance CUC and algae

    Votes: 23 47.9%
  • Provide macro algae to feed CUC

    Votes: 5 10.4%
  • Introduce CUC predators

    Votes: 1 2.1%
  • Other (please explain)

    Votes: 4 8.3%
Back
Top