Well Water Test Results - Thoughts?

VermontReefs

Active Member
View Badges
Joined
Jan 11, 2021
Messages
275
Reaction score
244
Location
Arlington Vermont
What state or country do you live in
Vermont
Rating - 0%
0   0   0
Happy Sunday,

We just purchased a 70 acre farm in Oct 2020. Please see below the well water report from Nelson Analytical Labs. I'm curious to hear from all the super experienced reefers what you think about these levels and if you see anything that will be an issue? Thought's on the PH,Calcium and or Manganese?

I've been reefing for 15+ years but as of 2010 took a 10 year hiatus and things have changed to say the least!

Please note: I will be installing a BRS 3 stage RO w/ TDS meter for all water.

The New Setup:
SPS Focused with some mixed reef. Primarily SPS/Zoa with very few LPS.
Tank: Cade 1200 S ( 110g display with 21g sump)
Fuge: Cheato + Kessil Fuge Light
Lighting: Radion G5 Pro w/ Diffusers tank mount
Skimmer: Reef Ocotpus Regal 150SSS with Varios
Return: Ecotech M2
Flow: 3-4 Ecotech MP10's
Reactors: BRS Dual Reactor plus 25w Emperor Equatics UV Sterilizer
Water: 3 Stage BRS with 2 65 gallon mixing station
Controller: Apex + Trident + Modules
Heater: 2X300w BRS Titanium



Water Results:



Total Coliform Bacteria Present Absent /100mL Primary Outside EPA Standard


E. coli Bacteria Absent Absent /100mL Primary Within EPA Standard


Nitrate-N <1.0 10 mg/L NO3 D Primary Within EPA Standard


Nitrite-N <0.01 1.0 mg/L NO2B Primary Within EPA Standard


Fluoride <0.20 4.0 mg/L Primary Within EPA Standard


Lead <0.001 0.015 mg/L Primary Within EPA Standard


Arsenic 0.003 0.010 mg/L Primary Within EPA Standard


Copper <0.010 1.30 mg/L Primary Within EPA Standard


Chloride <6 250 mg/L Secondary Within EPA Standard


pH 7.73 6.5-8.5 SU Secondary Within EPA Standard


Iron 0.120 0.300 mg/L Secondary Within EPA Standard


Manganese 0.078 0.050 mg/L Secondary Outside EPA Standard


Calcium 20.0 N/A mg/L N/A No EPA Limit


Magnesium 3.3 N/A mg/L No EPA Limit


Total Hardness 64 N/A mg/L No EPA Limit


Sodium 14 N/A mg/L No EPA Limit
 
Last edited:
You shouldn't have a big issue after the RO. Just make sure you have a flush valve and a DI chamber bypass for flushing before each use.
 
Where was the water drawn from? The well or a house tap?

The copper detection limit is not as low as I'd like to see for straight use, but none was detected. If that is from a house tap, it is better than testing from the well.

It should be fine pre RO/DI. :)
 
Where was the water drawn from? The well or a house tap?

The copper detection limit is not as low as I'd like to see for straight use, but none was detected. If that is from a house tap, it is better than testing from the well.

It should be fine pre RO/DI. :)
The water was pulled from the kitchen sink. Thanks for the input
 

TOP 10 Trending Threads

WHAT’S THE HARDEST PART OF REEFING TO EXPLAIN TO A NON-REEFER?

  • Why a tiny coral frag can cost that much

    Votes: 21 28.4%
  • Why I spend time testing and adjusting water

    Votes: 11 14.9%
  • Why the fish I want might not fit my tank

    Votes: 11 14.9%
  • Why I have buckets, tubing, and salt around the house

    Votes: 2 2.7%
  • Why corals are living animals, not decorations

    Votes: 20 27.0%
  • How much time and attention a reef takes

    Votes: 22 29.7%
  • The difference between freshwater and saltwater creatures

    Votes: 3 4.1%
  • I’ve stopped trying to explain

    Votes: 22 29.7%
  • Other (Post in the comments)

    Votes: 10 13.5%
Back
Top
Home
Post thread…
Market
What's new