What ballast for T5s do you use?

[prsnlty]

I need to find the correct ballast for 2 60" 80w t5s and can't get a straight answer.

I would like to find one under $100. This is for an in canopy retro install.

Thanks for helping :)
Jackie

 

[Reefing Madness]

ATI 2x80W T5 High-Output Ballast

 

[prsnlty]

ATI 2x80W T5 High-Output Ballast

Thank you, thank you! I looked and searched their site for the wiring and couldn't find it. Except for in retro kits. I already have the rest except the wiring and plugs. Any idea where I can get them?

Jackie
125g mixed reef peninsula

 

[Reefing Madness]

Wiring and plugs? I just go to Home Depot and buy an outdoor extension cord, and use that.

Or

http://www.hellolights.com/T5-Fluor...627011?ie=UTF8&title=T5+Fluorescent+DIY+Parts

 

[prsnlty]

Wiring and plugs? I just go to Home Depot and buy an outdoor extension cord, and use that.

Or

http://www.hellolights.com/T5-Fluor...627011?ie=UTF8&title=T5+Fluorescent+DIY+Parts

Good idea :) and I can get 18g wire also? What if the don't have 18g wire can 14g be used?

 

[Reefing Madness]

Yup, that will work also.

 

[prsnlty]

Yup, that will work also.

Great! I appreciate all of your help :) Thank you very much!

Jackie
125g mixed reef peninsula

 

[foxhuntr]

I would just get onto ebay and get a workhorse 7 ballast from Fulman.....you can run up to 220 watts on the one ballast.....just make sure you get a 120 volt and not the 277 volt......you can get them around $50 i run a 12 bulb 54 watt in canopy retro over my 200 gallon cube with all workhorse ballasts and couldnt be happier......i have been running workhorse for over 10 years without 1 problem......you can follow the diagram to wire the high output setup........you dont wanna overdrive the bulbs to much like a icecap 660 ballast would do ....that would take alot of life out your bulbs unless you invest into a good fan system to keep them cool..... i dont run any kind of fans on mine using the workhorse ballast....hope this helps you out a bit.....

 

[prsnlty]

I would just get onto ebay and get a workhorse 7 ballast from Fulman.....you can run up to 220 watts on the one ballast.....just make sure you get a 120 volt and not the 277 volt......you can get them around $50 i run a 12 bulb 54 watt in canopy retro over my 200 gallon cube with all workhorse ballasts and couldnt be happier......i have been running workhorse for over 10 years without 1 problem......you can follow the diagram to wire the high output setup........you dont wanna overdrive the bulbs to much like a icecap 660 ballast would do ....that would take alot of life out your bulbs unless you invest into a good fan system to keep them cool..... i dont run any kind of fans on mine using the workhorse ballast....hope this helps you out a bit.....

Thank you! I ordered 2 ATI ballasts, same price as the workhorse 7s. But this is great information! Yes, I think the icecap 430 may have overdriven my brand new ATI bulbs :( If they don't light when the new ballast gets here I'll know for sure. T5s are a new thing for me. I'm used to T12s and LEDs.

Jackie